 monstershop.co.uk | ||||||||||||||||
  Instructions by monstershop 16L Water Fed Backpack & 20ft Cleaning PoleThis guide provides step-by-step instructions for assembling components and using the 16L Water Backpack and 20ft Pole. Product Information16L Water Backpack and 20ft PoleLet us introduce your new water trolley, perfect for cleaning windows, cars, fences, drainage systems and so much more. You can even use it to water your lawn. This trolley is compact, simple to use, portable and easy to store. Powered by either a rechargeable battery or mains power, it delivers impressive water pressure, while the 16-litre tank capacity ensures you can complete your cleaning tasks with total ease.
Traditionally, window cleaners have relied on ladders, platforms and scaffolds , but now you don’t need to. The MaxBlast 20ft Window Cleaning Pole allows you to safely clean from ground level, reaching windows up to 20 feet high without the need for additional equipment. Versatile and easy to use, it’s ideal not only for windows but also for cars, fences, drainage systems and more. Featuring a simple locking mechanism, the pole can be quickly extended and secured at your desired length. Paired with the MaxBlast Water Trolley, this compact and portable combination provides a convenient and efficient solution for all your cleaning needs.
Parts 1Extension Locks 2Brush 3Water Pipe 4Handle 5Pole 6Squeegee 7  1) Charging/Mains Inlet (Side of Tank)82) On/Off Switch (Side of Tank) 93) Water Tank 104) Handle 115) Water Tank Cap 126) Water Feeder Pole Attachment Nozzle 1. Charge the batteryBefore first use on battery power, please ensure the battery is fully charged. To do this, attach the cable into charging inlet. Leave to charge for 12-24 hours. The indicator light will turn from red to green when it is fully charged. 2. Fill the tankOnce charged, unscrew the cap from the water tank. Fill with water. Replace the cap. Ensure the cap is securely fastened. 3. Connecting to Mains PowerIf you wish to power via mains electricity, first fill the water tank. Attach the cable into the mains inlet on the tank, and plug into the mains. 4. Accessory attachmentAttach the desired cleaning accessory via the attachment nozzle. Push and twist to secure. 5. Starting the Water FlowSwitch the water tank on via the ‘On/Off’ switch. Water should start flowing out of the water pole attachment. You are ready to begin cleaning. 6. Turning Off the PumpTurn the switch to ‘Off’ as soon as water stops flowing. Note: It is important not to run the pump dry as this can cause damage. 7. Refilling the Water TankRemove all cables and keep power off if you need to refill the tank. After refilling with water, repeat the operation process 8. Shutting Down and Storing the UnitOnce finished: turn switch to ‘Off’, remove cables (if applicable), remove feeder pole tube, discard of any excess water and store in an appropriate area 9. Assembling the Brush and SqueegeeTo assemble all you need to do is push the brush onto the pole using the connector. The Squeegee pushes in to the other side of the connector. 10. Connecting the Water TubingConnect the water pipe tubing onto the ducts. 11. Attaching the Pole to the TrolleyAttach the pole to the water trolley via the tank connector and you are all set up and ready. 12. Troubleshooting (Water Trolley)Please read through the guide below if you have any issues or faults with your MaxBlast Water Trolley. Q: There are parts missing from my order. A: If there appears to be any part missing from your package contact our Customer Support team via the details on the Contact Us page within 7 days of receipt. Q: My MaxBlast Water Trolley will not start or suddenly stops working. A: Check the plug socket is in and switched on at the mains. Ensure the battery is fully charged. Make sure there is plenty of water in the tank. Q: The liquid won’t spray out the attachment and/or the pressure is unstable. A: Make sure there is plenty of water in the tank and it is fully charged/ attached to a power supply. Check there is no blockages in the tubes or water tank. Clean the tubes/tank. If it is still not working correctly, the water suction tube is damaged and needs to be replaced. Q: The joint is leaking. A: Please check the caps and attachments are securely fastened. The rubber seal may need replacing. 13. Troubleshooting (Cleaning Pole)Please read through the guide below if you have any issues or faults with your MaxBlast Window Cleaning Pole. Q: There are parts missing from my order. A: If there appears to be any part missing from your package contact our Customer Support team via the details on the Contact Us page within 7 days of receipt. Q: The liquid won’t spray out the attachment and/or the pressure is unstable. A: Make sure there is plenty of water in the tank and it is fully charged/ attached to a power supply. Check there is no blockages in the tubes or water tank. Clean the tubes/tank. If it is still not working correctly, the water suction tube is damaged and needs to be replaced. Q: The joint is leaking. A: Please check the caps and attachments are securely fastened. The rubber seal may need replacing. |