monstershop.co.uk
Instructions by monstershop7-in-1 Games Table Bench
7-in-1 Games Table Bench 7-in-1 Games Table Bench Before you start Note Parts Steps 1. Before you start:2. Attach Side Panels 3. Fix the Bottom Plate 4. Add Support Braces 5. Install Legs 6. Assemble Leg Panels 7. Add Hinges and Lid 8. Add Hydraulic Strut Section 9 No results monstershop / 7-in-1 Games Table Bench Instructions by monstershop 7-in-1 Games Table Bench Instructions for assembling, installing, and using the 7-in-1 Games Table bench. It includes safety advice, operational guidelines, and maintenance tips. Product Information 7-in-1 Games Table Bench This versatile bench is designed to complement our 6-in-1 games table with dining table option, offering a stylish and practical seating and storage solution. Available in both Oak and Grey finishes, it blends seamlessly with a range of interiors. SKU 216198,216199 Dimensions L x W x H = 160cm x 30cm x 40cm Materials MDF, PU Leather, Metal Hardware Weight 18kg GPSR Information UK Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England, +441347878880 EU Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands +441347878880 Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands, +44134787888 Ensure you have read and fully understood the instruction manual and safety advice before using this product This bench is designed for indoor use only; do not expose it to outdoor conditions such as rain, direct sunlight, or damp environments, as this may damage MDF and PU leather materials. Only use the bench on a stable, level surface to prevent tipping, wobbling, or instability during use. Always position the bench in well-lit areas, away from main walkways or areas where people may trip over it when not in use. Assemble the bench fully in accordance with the provided instructions, using only the supplied hardware and recommended tools; ensure all fixings are secure and recheck them periodically. Do not attempt to modify, adapt, or remove any part of the bench, including the hydraulic struts, hinges, cushion, or frame. Do not exceed the maximum weight capacity of 190kg for the entire bench, including seated users and stored contents; always distribute weight evenly. Always open and close the lid slowly and under control; keep fingers, hands, and clothing clear of hinges and strut areas to avoid entrapment. Ensure the hydraulic struts are securely fixed and functioning properly before use; discontinue use and replace struts immediately if they are damaged, leaking, or loose. Do not force the lid open or closed, as this may cause damage or sudden lid failure. Do not sit or apply weight on the bench lid when it is open; always close the lid fully before sitting on the bench. Always sit centrally on the bench, not on the edges or ends, to prevent tipping or instability. Children must be supervised at all times when the bench is in use; do not allow children to play on, under, or inside the bench. Take care when sitting down, as the PU leather surface may become slippery, especially if wet; keep the cushion clean and dry at all times. Keep the bench free from sharp objects or debris that may damage the PU leather or cause injury. Do not attempt to move or lift the bench while someone is seated on it; when moving, lift with adequate assistance and do not drag or push, as this may damage the structure. Avoid exposure to heat sources, open flames, or smoking materials near the bench, as MDF and PU leather are flammable. Regularly inspect the bench for loose fittings, weakened joints, or signs of wear, and repair or replace parts as necessary before further use. Dispose of all packaging materials responsibly and keep them away from children to avoid suffocation or choking hazards. Parts Seat Cushion Stool Side Panel A Stool Side Panel B Stool End Panel (L) Stool End Panel (R) Stool Bottom Panel Support Brace Stool Leg A Stool Leg B Stool Leg Panel A Stool Leg Panel B Hinge Barometric Bar 15mm Screw 50mm Screw 1/4"x1-3/4" Bolt 1/4" Washer 25mm Screw 1/4"x1" Bolt Allen Key Tool 1. Before you start: Check that all parts and hardware are included. Use the Allen key (H7) provided for bolts. Lay out pieces on a flat, clean surface. 2. Attach Side Panels Connect Stool Side Panel A (P2) to the Stool End Panels (Left & Right – P4 & P5). Use 50mm screws (H2) to secure them as shown in Figure 1. 3. Fix the Bottom Plate Insert the Stool Bottom Plate (P6) into the frame. Secure it with 50 mm screws (H2) through the pre-drilled holes (Figure 3). 4. Add Support Braces Use 50mm screws (H2) to attach the Support Braces (P7) across the underside of the bench. (Figure 3). 5. Install Legs Connect Stool Leg A (P8) and Stool Leg B (P9) to the structure. Secure them using 1/4" Washers (H4) and 1/4" x 1-3/4" Bolts (H3) through the pre-drilled holes (Figure 4). 6. Assemble Leg Panels Attach Stool Leg Panels A (P10) and secure them using 1/4" Washers (H4) and 1/4" x 1" Bolt (H6) (see Figure 5) Then attach Stool Leg Panels B (P11) and use 25mm screws (H5) to secure them. (see Figure 6) 7. Add Hinges and Lid Fix the hinges (P12) onto the inside of the seat panel (P1) using 15mm screws (H1) (See Figure 7) Fix the other side of the hinges (P12) to the bench frame using 15 mm screws (H1) (See Figure 8) 8. Add Hydraulic Strut To attach the Hydraulic strut (P13) see Figures 9-10. First, position part (P13-C) to the inside top corners of the seat panel and secure each in place with screws (P13-D). Then attach part (P13-B) to both stool end panels (P4/P5) using screws (P13-D). Finally, see Figure 10, to fix part (P12-A) to parts (P13-C) and (P13-B). 9. Do not use cleaning products containing ammonia, bleach, or solvents on the bench. Wipe clean with a damp cloth and mild detergent only. monstershop (opens in new tab)Terms (opens in new tab)Privacy (opens in new tab)

Instructions by

monstershop

7-in-1 Games Table Bench

Instructions for assembling, installing, and using the 7-in-1 Games Table bench. It includes safety advice, operational guidelines, and maintenance tips.

Product Information

7-in-1 Games Table Bench

This versatile bench is designed to complement our 6-in-1 games table with dining table option, offering a stylish and practical seating and storage solution. Available in both Oak and Grey finishes, it blends seamlessly with a range of interiors.

SKU: 216198,216199
Dimensions: L x W x H = 160cm x 30cm x 40cm
Materials: MDF, PU Leather, Metal Hardware
Weight: 18kg

GPSR Information

Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG
Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England, +441347878880

Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands +441347878880
Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands, +44134787888

Ensure you have read and fully understood the instruction manual and safety advice before using this product

This bench is designed for indoor use only; do not expose it to outdoor conditions such as rain, direct sunlight, or damp environments, as this may damage MDF and PU leather materials.
Only use the bench on a stable, level surface to prevent tipping, wobbling, or instability during use.
Always position the bench in well-lit areas, away from main walkways or areas where people may trip over it when not in use.
Assemble the bench fully in accordance with the provided instructions, using only the supplied hardware and recommended tools; ensure all fixings are secure and recheck them periodically.
Do not attempt to modify, adapt, or remove any part of the bench, including the hydraulic struts, hinges, cushion, or frame.
Do not exceed the maximum weight capacity of 190kg for the entire bench, including seated users and stored contents; always distribute weight evenly.
Always open and close the lid slowly and under control; keep fingers, hands, and clothing clear of hinges and strut areas to avoid entrapment.
Ensure the hydraulic struts are securely fixed and functioning properly before use; discontinue use and replace struts immediately if they are damaged, leaking, or loose.
Do not force the lid open or closed, as this may cause damage or sudden lid failure.
Do not sit or apply weight on the bench lid when it is open; always close the lid fully before sitting on the bench.
Always sit centrally on the bench, not on the edges or ends, to prevent tipping or instability.
Children must be supervised at all times when the bench is in use; do not allow children to play on, under, or inside the bench.
Take care when sitting down, as the PU leather surface may become slippery, especially if wet; keep the cushion clean and dry at all times.
Keep the bench free from sharp objects or debris that may damage the PU leather or cause injury.
Do not attempt to move or lift the bench while someone is seated on it; when moving, lift with adequate assistance and do not drag or push, as this may damage the structure.
Avoid exposure to heat sources, open flames, or smoking materials near the bench, as MDF and PU leather are flammable.
Regularly inspect the bench for loose fittings, weakened joints, or signs of wear, and repair or replace parts as necessary before further use.
Dispose of all packaging materials responsibly and keep them away from children to avoid suffocation or choking hazards.

Parts

Seat Cushion

Stool Side Panel A

Stool Side Panel B

Stool End Panel (L)

Stool End Panel (R)

Stool Bottom Panel

Support Brace

Stool Leg A

Stool Leg B

Stool Leg Panel A

Stool Leg Panel B

Hinge

Barometric Bar

15mm Screw

50mm Screw

1/4"x1-3/4" Bolt

1/4" Washer

25mm Screw

1/4"x1" Bolt

Allen Key Tool

1. Before you start:

Check that all parts and hardware are included.

Use the Allen key (H7) provided for bolts.
Lay out pieces on a flat, clean surface.

2. Attach Side Panels

Connect Stool Side Panel A (P2) to the Stool End Panels (Left & Right – P4 & P5).

Use 50mm screws (H2) to secure them as shown in Figure 1.

3. Fix the Bottom Plate

Insert the Stool Bottom Plate (P6) into the frame.

Secure it with 50 mm screws (H2) through the pre-drilled holes (Figure 3).

4. Add Support Braces

Use 50mm screws (H2) to attach the Support Braces (P7) across the underside of the bench. (Figure 3).

5. Install Legs

Connect Stool Leg A (P8) and Stool Leg B (P9) to the structure.
Secure them using 1/4" Washers (H4) and 1/4" x 1-3/4" Bolts (H3) through the pre-drilled holes (Figure 4).

6. Assemble Leg Panels

Attach Stool Leg Panels A (P10) and secure them using 1/4" Washers (H4) and 1/4" x 1" Bolt (H6) (see Figure 5)
Then attach Stool Leg Panels B (P11) and use 25mm screws (H5) to secure them. (see Figure 6)

7. Add Hinges and Lid

Fix the hinges (P12) onto the inside of the seat panel (P1) using 15mm screws (H1) (See Figure 7)
Fix the other side of the hinges (P12) to the bench frame using 15 mm screws (H1) (See Figure 8)

8. Add Hydraulic Strut

To attach the Hydraulic strut (P13) see Figures 9-10.
First, position part (P13-C) to the inside top corners of the seat panel and secure each in place with screws (P13-D).
Then attach part (P13-B) to both stool end panels (P4/P5) using screws (P13-D).
Finally, see Figure 10, to fix part (P12-A) to parts (P13-C) and (P13-B).

9.

Do not use cleaning products containing ammonia, bleach, or solvents on the bench. Wipe clean with a damp cloth and mild detergent only.