{ "schema": "stepacross.manual.v1", "slug": "6-in-1-games-table-bench", "lang": "en", "title": "7-in-1 Games Table Bench ", "description": " Instructions for assembling, installing, and using the 7-in-1 Games Table bench. It includes safety advice, operational guidelines, and maintenance tips.", "status": "public", "chapters": [ { "infos": [ { "title": "", "text": "**Ensure you have read and fully understood the instruction manual and safety advice before using this product**\n\n* This bench is designed for indoor use only; do not expose it to outdoor conditions such as rain, direct sunlight, or damp environments, as this may damage MDF and PU leather materials. \n* Only use the bench on a stable, level surface to prevent tipping, wobbling, or instability during use.\n* Always position the bench in well-lit areas, away from main walkways or areas where people may trip over it when not in use.\n* Assemble the bench fully in accordance with the provided instructions, using only the supplied hardware and recommended tools; ensure all fixings are secure and recheck them periodically.\n* Do not attempt to modify, adapt, or remove any part of the bench, including the hydraulic struts, hinges, cushion, or frame.\n* Do not exceed the maximum weight capacity of 190kg for the entire bench, including seated users and stored contents; always distribute weight evenly.\n* Always open and close the lid slowly and under control; keep fingers, hands, and clothing clear of hinges and strut areas to avoid entrapment.\n* Ensure the hydraulic struts are securely fixed and functioning properly before use; discontinue use and replace struts immediately if they are damaged, leaking, or loose.\n* Do not force the lid open or closed, as this may cause damage or sudden lid failure.\n* Do not sit or apply weight on the bench lid when it is open; always close the lid fully before sitting on the bench.\n* Always sit centrally on the bench, not on the edges or ends, to prevent tipping or instability.\n* Children must be supervised at all times when the bench is in use; do not allow children to play on, under, or inside the bench.\n* Take care when sitting down, as the PU leather surface may become slippery, especially if wet; keep the cushion clean and dry at all times.\n* Keep the bench free from sharp objects or debris that may damage the PU leather or cause injury.\n* Do not attempt to move or lift the bench while someone is seated on it; when moving, lift with adequate assistance and do not drag or push, as this may damage the structure.\n* Avoid exposure to heat sources, open flames, or smoking materials near the bench, as MDF and PU leather are flammable.\n* Regularly inspect the bench for loose fittings, weakened joints, or signs of wear, and repair or replace parts as necessary before further use.\n* Dispose of all packaging materials responsibly and keep them away from children to avoid suffocation or choking hazards.\n\n", "type": "Safety" } ], "steps": [], "sections": [ { "images": [], "title": "Before you start:", "description": "Check that all parts and hardware are included.\n\n* Use the Allen key (H7) provided for bolts.\n* Lay out pieces on a flat, clean surface.\n\n" }, { "images": [ { "path": "images/07847dcf9c8081cd.jpg" } ], "title": "Attach Side Panels", "description": "* Connect **Stool Side Panel A (P2)** to the **Stool End Panels (Left & Right – P4 & P5)**.\n\n- Use **50mm screws (H2)** to secure them as shown in **Figure 1.**\n\n" }, { "images": [ { "path": "images/3e39436d1e953232.jpg" }, { "path": "images/295b0f45c015e3c5.jpg" } ], "title": "Fix the Bottom Plate ", "description": "* Insert the **Stool Bottom Plate (P6)** into the frame.\n\n- Secure it with **50 mm screws (H2)** through the pre-drilled holes (**Figure 3**).\n\n \n" }, { "images": [ { "path": "images/adf750f10fb5288c.jpg" } ], "title": "Add Support Braces ", "description": "* Use **50mm screws (H2)** to attach the **Support Braces (P7)** across the underside of the bench. (**Figure 3**).\n\n" }, { "images": [ { "path": "images/ce6d5290643b8ae3.jpg" } ], "title": "Install Legs", "description": "* Connect **Stool Leg A (P8)** and **Stool Leg B (P9)** to the structure. \n* Secure them using **1/4\" Washers** **(H4)** and **1/4\" x 1-3/4\" Bolts (H3)** through the pre-drilled holes **(Figure 4).**\n\n" }, { "images": [ { "path": "images/373c924841bbde3a.jpg" }, { "path": "images/e4b486882556c79d.jpg" } ], "title": "Assemble Leg Panels ", "description": "* Attach **Stool Leg Panels A (P10)** and secure them using **1/4\" Washers** **(H4)** and **1/4\" x 1\"** **Bolt (H6)** **(see Figure 5)**\n* Then attach **Stool Leg Panels B (P11)** and use **25mm screws (H5)** to secure them. **(see Figure 6)**\n\n
\n\n" }, { "images": [ { "path": "images/d21a586cd3b1fe47.jpg" }, { "path": "images/6028b6fa4d9df364.jpg" } ], "title": "Add Hinges and Lid", "description": "* Fix the **hinges (P12)** onto the inside of the **seat panel (P1)** using 1**5mm screws (H1) (See Figure 7)**\n* Fix the other side of the **hinges (P12)** to the bench frame using **15 mm screws (H1)** **(See Figure 8)**\n\n" }, { "images": [ { "path": "images/988a7ed471497dd5.jpg" }, { "path": "images/14683ca40eeaf2ed.jpg" } ], "title": "Add Hydraulic Strut ", "description": "* To attach the **Hydraulic strut (P13)** see **Figures 9-10.**\n* First, position **part (P13-C)** to the inside top corners of the seat panel and secure each in place with **screws** **(P13-D).**\n* Then attach **part** **(P13-B)** to both **stool end panels (P4/P5)** using **screws** **(P13-D)**.\n* Finally, see **Figure 10**, to fix **part (P12-A)** to **parts (P13-C) and (P13-B).**\n\n" }, { "images": [], "description": "* Do not use cleaning products containing ammonia, bleach, or solvents on the bench. Wipe clean with a damp cloth and mild detergent only.\n" } ], "materials": { "items": [ { "name": "Seat Cushion", "image": { "path": "images/64fb0e15c574c6b7.jpg", "alt": "" } }, { "name": "Stool Side Panel A ", "image": { "path": "images/161fae0e3a242249.jpg", "alt": "" } }, { "name": "Stool Side Panel B", "image": { "path": "images/182d9241950c044a.jpg", "alt": "" } }, { "name": "Stool End Panel (L)", "image": { "path": "images/3b06a64b23835f54.jpg", "alt": "" } }, { "name": "Stool End Panel (R)", "image": { "path": "images/2bd22fd5b3fdca98.jpg", "alt": "" } }, { "name": "Stool Bottom Panel", "image": { "path": "images/d281b7f6845645b7.jpg", "alt": "" } }, { "name": "Support Brace ", "image": { "path": "images/e59863daf39de209.png", "alt": "" } }, { "name": "Stool Leg A", "image": { "path": "images/261d4685c74f1a78.jpg", "alt": "" } }, { "name": "Stool Leg B ", "image": { "path": "images/602f70ad5c423046.jpg", "alt": "" } }, { "name": "Stool Leg Panel A", "image": { "path": "images/cf4a5fa56204d2f4.jpg", "alt": "" } }, { "name": "Stool Leg Panel B ", "image": { "path": "images/21da6c4cfd2db1f9.jpg", "alt": "" } }, { "name": "Hinge ", "image": { "path": "images/5012c3b12d5caf99.jpg", "alt": "" } }, { "name": "Barometric Bar ", "image": { "path": "images/f1d60bb7becbff68.jpg", "alt": "" } }, { "name": "15mm Screw ", "image": { "path": "images/26dc938645642e70.jpg", "alt": "" } }, { "name": "50mm Screw", "image": { "path": "images/d9cbf8c1c41451b5.jpg", "alt": "" } }, { "name": "1/4\"x1-3/4\" Bolt", "image": { "path": "images/8d94e9ade5c9fb60.jpg", "alt": "" } }, { "name": "1/4\" Washer ", "image": { "path": "images/e0a387d56134ab39.jpg", "alt": "" } }, { "name": "25mm Screw", "image": { "path": "images/222cafc7808e9c8b.jpg", "alt": "" } }, { "name": "1/4\"x1\" Bolt ", "image": { "path": "images/5104dfd077c52078.jpg", "alt": "" } }, { "name": "Allen Key Tool", "image": { "path": "images/24153c69626c2fd4.png", "alt": "" } } ], "title": "Parts" }, "productInfo": { "characteristics": [ { "label": "SKU", "value": "216198,216199" }, { "label": "Dimensions", "value": "L x W x H = 160cm x 30cm x 40cm" }, { "label": "Materials", "value": "MDF, PU Leather, Metal Hardware" }, { "label": "Weight", "value": "18kg" } ], "variations": [], "name": "7-in-1 Games Table Bench ", "description": "This versatile bench is designed to complement our 6-in-1 games table with dining table option, offering a stylish and practical seating and storage solution. Available in both Oak and Grey finishes, it blends seamlessly with a range of interiors.\n" } } ], "cover": { "title": "7-in-1 Games Table Bench ", "description": " Instructions for assembling, installing, and using the 7-in-1 Games Table bench. It includes safety advice, operational guidelines, and maintenance tips.", "image": { "path": "images/388bb6a75fb083dc.jpg", "alt": "" } } }