monstershop.co.uk
Instructions by monstershop Bubble Tea Station
Bubble Tea Station Bubble Tea Station Before you start Unit Overview Specifications Safety Advice GPSR Information Parts Steps 1. Install the Middle Overshelf 2. Install the Left Overshelf (top and support)3. Install the Right Overshelf (top and support)4. Install Faucet and Pots 5. Install the Drain Pipe No results monstershop / Bubble Tea Station Instructions by monstershop Bubble Tea Station 214781 Unit Overview The Bubble Tea Stainless Steel Workstation is a robust and efficient solution designed for modern bubble tea operations. Engineered to accommodate essential equipment such as an automatic tea shaker, automatic cup sealing machine, ice maker, and back bar cooler, this workstation streamlines your workflow while maintaining a clean and professional appearance. Its durable stainless steel construction ensures longevity and ease of maintenance, making it an ideal choice for high-traffic bubble tea shops aiming to optimise efficiency and organisation. Specifications Work Height: 92cm Sink: W 29.8 x D 34.9cm x 23cm Deep Large Ice Well: W 53.8 x 41.4 x 29.2cm deep Drip tray inc glass refresher: W 91.9 x D 15.6cm Handy Cupboard - internal: W 62.3 x D 68.6 x H 47.7cm External: W 54.5cm Door: W26.9cm (x2) RH opening: W 91.9 x D 67.7 x 91 cm LH opening: W 37.9 x D 64.2 x H91 cm Shelf dims - Above Sink: W 40 x D 24.8 cm (Height from worktop 34.5cm) Above Ice Well: W 85 x D 24.8 cm (Height from worktop 56.6cm) Above work area W 73 x D 24.8 cm (Height from worktop 56.6cm) Safety Advice Ensure the station is installed on a level surface capable of supporting its weight, including the weight of all accessories, ingredients, and machinery that may be added during use. Verify the station is installed in a location with adequate ventilation, away from sources of open flame, high humidity, or extreme temperatures. Do not modify or drill into the station, as this may compromise its structural integrity or void the warranty. The ice well should be filled only with food-safe ice. Ensure the sink is connected to a proper water supply and drainage system by a qualified professional. Do not use the sink until the connections have been inspected and are confirmed to be leak-free. Always use the flexi tap gently to avoid damage or leaks. Inspect the tap and its connections regularly for signs of wear or malfunction, and replace parts as needed. Only use the provided pumps for syrup dispensing. Check the pumps for wear and functionality regularly, and replace pumps immediately if they show signs of wear, clogging, or damage. Keep all electrical components and machinery placed in the dedicated spaces away from water sources. Ensure proper grounding of electrical appliances to reduce the risk of shock or fire. Store ingredients, tools, and supplies in the designated storage areas. Do not store heavy items on top of the station to avoid tipping hazards. Do not climb, lean heavily on, or sit on the station. This product is not designed to support body weight or excessive loads beyond its intended usage. GPSR Information UK Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880 EU Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands. Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880 Parts Bubble Tea Station Middle Overshelf Left Overshelf Top Left Overshelf Support Right Overshelf Top Right Overshelf Support Faucet Gastro Pots Glass Refresher Ice Well Drain Waste Connector Waste Pipe M618mm Cross Head Screws M620mm Hex Bolt M6 Gaskets Spring Gaskets 1. Install the Middle Overshelf Using the Hex screws provided, fit the Middle Overshelf to the Bubble Tea Workstation, making sure to fasten tightly to properly secure the shelf to the station. 2. Install the Left Overshelf (top and support) As with the previous step, secure the shelf to both the Bubble Tea Workstation and the Middle Overshelf using the screws provided. For the connection between the shelf and the workstation use the Hex screws to attach. For connecting the shelves together utilise the cross head screws. 3. Install the Right Overshelf (top and support) As with the previous step secure the shelf to both the Bubble Tea Workstation and the Middle Overshelf by screwing the parts together using the screws provided. For the connection between the shelf and the workstation use the Hex screws to attach. For connecting the shelves together utilise the cross head screws. 4. Install Faucet and Pots Place the gastro pots into the corresponding spaces on the Middle Overshelf. Screw the faucet into the Bubble Tea Workstation by placing it into the holes and securing it underneath. 5. Install the Drain Pipe Fasten the Glass refresher, Ice Well Drain and Waste Pipe to the Waste Connector. Then fasten the Waste Connector to the Sink Drain, securing tightly to avoid leaking. monstershop (opens in new tab)Terms (opens in new tab)Privacy (opens in new tab)

Instructions by

monstershop

Bubble Tea Station

214781

Safety Advice

Ensure the station is installed on a level surface capable of supporting its weight, including the weight of all accessories, ingredients, and machinery that may be added during use.
Verify the station is installed in a location with adequate ventilation, away from sources of open flame, high humidity, or extreme temperatures.
Do not modify or drill into the station, as this may compromise its structural integrity or void the warranty.
The ice well should be filled only with food-safe ice.
Ensure the sink is connected to a proper water supply and drainage system by a qualified professional. Do not use the sink until the connections have been inspected and are confirmed to be leak-free.
Always use the flexi tap gently to avoid damage or leaks. Inspect the tap and its connections regularly for signs of wear or malfunction, and replace parts as needed.
Only use the provided pumps for syrup dispensing. Check the pumps for wear and functionality regularly, and replace pumps immediately if they show signs of wear, clogging, or damage.
Keep all electrical components and machinery placed in the dedicated spaces away from water sources. Ensure proper grounding of electrical appliances to reduce the risk of shock or fire.
Store ingredients, tools, and supplies in the designated storage areas. Do not store heavy items on top of the station to avoid tipping hazards.
Do not climb, lean heavily on, or sit on the station. This product is not designed to support body weight or excessive loads beyond its intended usage.

Parts

Bubble Tea Station

Middle Overshelf

Left Overshelf Top

Left Overshelf Support

Right Overshelf Top

Right Overshelf Support

Faucet

Gastro Pots

Glass Refresher

Ice Well Drain

Waste Connector

Waste Pipe

M6*18mm Cross Head Screws

M6*20mm Hex Bolt

M6 Gaskets

Spring Gaskets

1. Install the Middle Overshelf

Using the Hex screws provided, fit the Middle Overshelf to the Bubble Tea Workstation, making sure to fasten tightly to properly secure the shelf to the station.

2. Install the Left Overshelf (top and support)

As with the previous step, secure the shelf to both the Bubble Tea Workstation and the Middle Overshelf using the screws provided. For the connection between the shelf and the workstation use the Hex screws to attach. For connecting the shelves together utilise the cross head screws.

3. Install the Right Overshelf (top and support)

As with the previous step secure the shelf to both the Bubble Tea Workstation and the Middle Overshelf by screwing the parts together using the screws provided. For the connection between the shelf and the workstation use the Hex screws to attach. For connecting the shelves together utilise the cross head screws.

4. Install Faucet and Pots

Place the gastro pots into the corresponding spaces on the Middle Overshelf. Screw the faucet into the Bubble Tea Workstation by placing it into the holes and securing it underneath.

5. Install the Drain Pipe

Fasten the Glass refresher, Ice Well Drain and Waste Pipe to the Waste Connector. Then fasten the Waste Connector to the Sink Drain, securing tightly to avoid leaking.