{
  "schema": "stepacross.manual.v1",
  "slug": "builders-trestle-stand",
  "lang": "en",
  "title": "Builders Trestle Stand",
  "description": "Trestle stand for construction\n\n",
  "status": "public",
  "chapters": [
    {
      "infos": [
        {
          "title": "Safety\n",
          "text": "**Ensure you have read and fully understood the instruction manual and safety advice before using this product.**\n\n* Do not exceed the maximum load capacity of 200kg per stand; overloading may result in structural failure or collapse.\n\n* Ensure all locking pins, chains, and mechanical securing mechanisms are properly fastened and checked before each use.\n\n* Only use the trestle stands on firm, level ground to prevent tipping or collapse.\n\n* Avoid applying sideways pressure to the stands; do not lean ladders, boards, or heavy materials against them.\n\n* If lateral force cannot be avoided due to usage demands, secure or anchor the stands appropriately to a fixed structure or surface.\n\n* Keep hands, fingers, and clothing clear of pinch points and moving joints during setup, height adjustment, and dismantling to avoid injury.\n\n* Always wear suitable protective gloves when adjusting the stand height or assembling the unit.\n\n* Place trestle stands in positions that do not obstruct walkways or high-traffic areas to prevent tripping hazards.\n\n* Use high-visibility tape or markers on the base legs if the product is used in dim or low-light conditions.\n\n* Do not modify the structure or components in any way; use only as intended by the manufacturer.\n\n* Ensure any tools placed on built-in holders or trays are stable and will not fall during use; do not overload tool holder shelves.\n\n* Ensure the product is fully collapsed to the lowest height when not in use to prevent accidental injury or obstruction.\n\n* Do not allow children or untrained individuals to use or handle the trestle stands.\n\n* Maintain a clear working environment around the product at all times and avoid clutter that could cause instability.\n\n* Do not use this product for any purpose other than its intended design, such as supporting temporary work surfaces or structures under safe, controlled conditions.\n\n* In multi-user or shared environments, implement and follow a usage log or inspection record system to ensure ongoing safety compliance.\n\n \n",
          "type": "Safety"
        },
        {
          "title": "GPSR Information\n",
          "text": "**UK**\n\n \n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n",
          "type": "Gpsr"
        }
      ],
      "steps": [],
      "sections": [
        {
          "images": [
            {
              "path": "images/c103787431bac891.jpg"
            }
          ],
          "title": "Prep the two side frames",
          "description": "<br />\n\n1. Put the two support leg frames (2) on the floor, parallel to each other, with the open tops facing upward (where the top bar will sit).&#x20;\n\n"
        },
        {
          "images": [
            {
              "path": "images/660ddbb6a3543a29.jpg"
            }
          ],
          "title": "Install the vertical bars",
          "description": "<br />\n\n1. Insert the two vertical straight bars (3) into the upper sockets/holders on the **support leg frames (2)** (one vertical bar per side frame).\n2. Secure each vertical bar (3) to its support leg frame (2) using the **Locking Screw (10) and Locking Device (12)** in the holes shown for that joint.\n\n"
        },
        {
          "images": [
            {
              "path": "images/a2abbacc38a2c72e.jpg"
            }
          ],
          "title": "Connect the side frames with the bottom bar",
          "description": "<br />\n\n1. Fit the **bottom horizontal straight bar (4)** between the two side frames (2), aligning the holes.\n2. Bolt it in place using **M6×40 screws (6)** with **washers (7)** and **M6 nuts (8)** at each end.\n\n"
        },
        {
          "images": [
            {
              "path": "images/dbe56ca6675e34c3.jpg"
            }
          ],
          "title": "Fit the top bar",
          "description": "<br />\n\n1. Place the **top bar (1)** across the tops of the two **vertical bars (3)**.\n2. Secure the top bar (1) to each vertical bar (3) using **M6×40 screws (6)** + **washers (7)** + **M6 nuts (8)**.\n\n"
        },
        {
          "images": [
            {
              "path": "images/c17b873dbe39a01c.jpg"
            }
          ],
          "title": "Install the tool rack and hook",
          "description": "<br />\n\n1. Attach the **tool rack (9)** in the position shown.&#x20;\n2. Fix it using the indicated **M6 hardware (6, 7, 8)**.\n3. Attach the **hook (11)** to the rack/position shown, using the indicated fastener points.&#x20;\n\n"
        },
        {
          "images": [],
          "title": "Install the support feet",
          "description": "<br />\n\n1. Screw the **support feet (5)** onto the bottoms of the **support leg frames (2)**&#x20;\n2. Adjust them so the stand sits flat and doesn’t rock.\n\n"
        },
        {
          "images": [],
          "description": "<br />\n\n* **Inspect regularly:** Check the frame, welds, and adjustment mechanisms for signs of wear, cracks, or distortion before each use.\n\n* **Keep joints and moving parts clean:** Remove dirt, dust, and debris from hinges, locking pins, and adjustment points, and lightly oil them to ensure smooth operation.\n\n* **Protect against corrosion:** Wipe down the stand after exposure to moisture and store it in a dry area to prevent rust; apply a rust-inhibiting spray if needed.\n\n* **Tighten components:** Periodically check all bolts, screws, and locking mechanisms to ensure they remain secure and functional.\n\n* Store the trestle stands in a dry, sheltered environment to prevent corrosion and damage from weather exposure.\n\n"
        }
      ],
      "materials": {
        "items": [
          {
            "name": "Top Bar "
          },
          {
            "name": "Vertical bar with stand "
          },
          {
            "name": "Side Extension Bar"
          },
          {
            "name": " Central Bar "
          },
          {
            "name": "Foot "
          },
          {
            "name": "Screw M6x40"
          },
          {
            "name": "Washer 06"
          },
          {
            "name": "Nut M6 "
          },
          {
            "name": "Tool Tray "
          },
          {
            "name": "Locking Screw "
          },
          {
            "name": "Hook"
          },
          {
            "name": "Chain Locking device "
          },
          {
            "name": "Screw M5x45"
          },
          {
            "name": "Nut M5"
          }
        ],
        "title": "Parts"
      },
      "productInfo": {
        "characteristics": [
          {
            "label": "SKU",
            "value": "216672,216586,216587,216673,216588,216591,216593"
          },
          {
            "label": "Dimensions",
            "value": "100 (L) x 60 (W) x 100-180 (H) cm "
          },
          {
            "label": "Weight",
            "value": "8kg"
          },
          {
            "label": "Materials",
            "value": "Steel Frame, Plastic Feet"
          }
        ],
        "variations": [],
        "name": "Builders' Trestle Board Stand ",
        "description": "Our premium Builders’ Trestle Board Stand is engineered for strength, stability, and reliable performance across all types of construction and maintenance work. Built from heavy-duty steel with adjustable height and levelling feet, it provides a secure and adaptable platform on any jobsite. An integrated tool tray keeps essential equipment within easy reach, delivering improved efficiency and convenience throughout the workday.\n"
      }
    }
  ],
  "cover": {
    "title": "Builders Trestle Stand",
    "description": "Trestle stand for construction\n\n",
    "image": {
      "path": "images/78ed7db9d6afb965.jpg",
      "alt": ""
    }
  }
}