Cantilever Parasol Plain Base

Instructions for assembling the Cantilever Parasol Plain Base. It includes safety advice, a parts list and assembly instructions to ensure proper setup of the parasol base for outdoor use.

Product Information

Cantilever Parasol Plain Base

Provide reliable support for your garden umbrella with this Plain Parasol Base, designed for stability and everyday outdoor use. This product offers a durable and sturdy foundation to keep your parasol securely in place. Simple, practical, and easy to position, this base is an ideal choice for patios, gardens, and outdoor seating areas, helping you enjoy shaded comfort with confidence.

SKU: 216441

Product Height:	0.07 M
Product Depth:	0.5 M
Product Width:	0.5 M
Product Net Weight:	7.6 KG
Product Gross Weight:	8.6 KG
Material:	Plastic, Steel

Safety Advice

Ensure you have read and fully understood the instruction manual and safety advice before using this product.
Always position the parasol base on a flat, stable surface to prevent tipping or uneven load distribution.
The base must be fully assembled and securely attached before mounting any parasol or vertical structure.
Fill the base compartments with the specified material (e.g. water, sand, or other approved filler) to their maximum capacity to achieve optimal weight and stability.
Never use the parasol base without filling it, as this significantly increases the risk of tipping or product failure.
Before use, check that all locking components and connecting parts are properly engaged and secured.
Inspect the base regularly for signs of wear, damage, cracks, or leaks—do not use if any part appears compromised.
If using water as a filler, check periodically for evaporation or freezing in colder weather and top up as needed.
Avoid placing the base in high-traffic areas, walkways, or near doorways to reduce the risk of tripping or collision.
Be mindful of the base’s footprint when walking nearby, especially when installed with a cantilever parasol that offsets the central weight.
Use caution when lifting or repositioning the base; do not attempt to move it when it is full, as the weight may cause injury.
Always use proper lifting techniques when handling the base components and seek assistance when repositioning or assembling.
Wear sturdy, closed-toe footwear during assembly or disassembly to protect against injury from dropped parts or segments.
Do not lift any section of the base above foot level when loaded to avoid the risk of foot or toe injuries.
Assemble and disassemble the base slowly and carefully to prevent pinching or dropping components.
Do not modify the base or use it with incompatible parasol models or mounting systems.
Ensure the parasol being used is suitable for the size and weight of the base, as specified in the product manual.
In strong winds, storms, or during extended periods of non-use, remove the parasol from the base and store both safely indoors or in a sheltered location.
Never climb, stand on, or use the base for any purpose other than stabilising a compatible cantilever parasol.
Dispose of damaged or deformed base components safely and do not attempt unauthorised repairs; always contact the manufacturer for approved replacement parts.

Parts

Plain Base

1. Fill Base Weight

Remove the cap from each base weight.

Fill each unit with sand or water until full.\

Sand provides the greatest stability.

Securely tighten the caps to prevent leakage.

2. Position the Base Weights

Lay all four base weights on the ground around the parasol stand location.

Arrange them so they form a square shape, leaving the centre area open for the parasol cross-base.

3. Secure the Base

Attach the fixing hardware (as indicated in the diagram) through the designated holes to lock the parasol’s cross-base firmly into the weights.
Ensure all pins are tightly secured.

1. Maintenance

General Inspection

Check base regularly for:

* Cracks or leaks

* Signs of wear

Ensure base remains fully filled as specified

Stability

Verify base is properly assembled and secure before use

Check for settling or imbalance over time

Manual Handling

Do not attempt to move the base when filled

Use correct lifting techniques

Seek assistance when repositioning

Self Positioning

Place in low-traffic areas

Avoid walkways and entrances

Remain aware of base footprint

Assembly and Disassembly

Assemble slowly and carefully

Wear sturdy footwear to prevent injury from dropped components

2. Troubleshooting

Please read through the guide below if you have any issues or faults with your device. The information covers and resolves the majority of frequently asked questions.

Q: There are parts missing from my order. A: If there appears to be any part missing from your package contact our Customer Support team via the details on the Contact Us page within 7 days of receipt.

For all other issues please contact our Customer Support department via the details on the Contact page.