monstershopmonstershop.co.uk
Instructions by monstershopChain Drag Harrow 1.2m
monstershop

Chain Drag Harrow 1.2m

Chain Drag Harrow 1.2m
Before you start
Unit OverviewSafety AdviceGPSR Information Parts
Steps
Step 1Step 2Step 3Step 4Step 5Step 6Step 7Step 8Step 9Step 1011. Maintenance 12. Troubleshooting

No results

monstershop
monstershop / Chain Drag Harrow 1.2m
Chain Drag Harrow 1.2m
monstershop

Instructions by

monstershop

Chain Drag Harrow 1.2m

Unleash the power of precision and efficiency with our advanced drag harrow, a powerful farming companion meticulously engineered to transform your cultivation process.

Unit Overview

The robust steel construction of the 1.2m Drag Harrow ensures its exceptional

performance in leveling dirt, racing tracks, and playing fields. Preparing the ground for planting while raking up dead forage.

The high carbon steel composition of the harrow guarantees a maintenance-free

experience. Additionally, the steel draw bar makes it easy for towing behind Tractors,

Pickups, and ATVs / UTVs.

Safety Advice

• DO NOT allow children to play on, stand upon or climb on the drag harrow.

• DO NOT at any time carry passengers either sitting or standing on the drag harrow.

• Always inspect the drag harrow before using to assure it is in good working condition.

• Replace or repair damaged or worn parts immediately.

• Always check and tighten any loose parts before operation.

• Avoid large holes and ditches when operating the drag harrow.

• Always operate at reduce speed in rough terrain, along creeks, ditches and on hillsides.

• DO NOT operate close to creeks, ditches and public highways.

• To avoid personal injury and/or equipment damage DO NOT EXCEED 10 MPH.

• Always use caution when operating the drag harrow and be aware of your surroundings.

• Only use with recommended vehicles (Tractors, Pick-ups and ATVs / UTVs).

• Always secure the drag harrow to the vehicle hitch before operating.

• Always keep hands and feet clear from moving parts while operating the equipment.

• Always clean harrow from debris and keep work area clear when operating.

• Always wear safety gear, eye protection, gloves and work boots when using the drag harrow.

GPSR Information

UK

  • Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.
  • Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880

EU

  • Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.
  • Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880

Parts

Snap Hook
2.4m, 4.0mm Chain
1.2m x 25mm Flat Bar
Harrow Plate
Bolts
Nuts
Washers
1.2m x 1.5m Q235 Steel Chain Link Harrow

1.

1\. Lay harrow onto the ground and stretch out flat.

2.

2\. Instead in Flat Bar through first row of links on the Harrow.

3.

3\. Attach first pair of Harrow Plate to either side on the Flat Bar and chain with bolts, washers and nuts provided.

4.

4\. Attached second pair of harrow plates to either side to your desired width, depending on if you are using concrete block or bricks.

5.

5\. Rounded heads of carriage bolts should be on the top (facing upwards).

6.

6\. Check all fasteners to ensure that they are tight.

7.

7\. Fasten item the quick link (1) onto the chain at the desired position to pull harrow straight or at angles.

8.

8\. Additional weight may be added to unit by placing 8’’concrete blocks along front section as in figure above.

9.

9\. Hold down straps may also be necessary to secure blocks into place.

10.

10\. After you have located the desired position, hook the link onto your hitch.

11. Maintenance

MAINTENANCE

• Periodically check all fasteners for tightness.

• Annually clean and lightly lubricate all moving parts.

• Use a glossy enamel spray paint to touch up scratched or worn painted metal surfaces.

• If a part need replacing, only use parts that meet the manufacturer’s specifications. Replacement parts that do not meet specifications may result in a safety hazard or poor operation.

STORAGE

• Before storing make sure the drag harrow is clean and dry for years of trouble free service.

• Store indoors or protected area during severe weather and winter months.

12. Troubleshooting

If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.

monstershop
monstershop (opens in new tab)Terms (opens in new tab)Privacy (opens in new tab)