Instructions by

monstershop

Darts Board Bundle

Instructions and safety advice for the assembly and use of the Monster Shop Darts Bundle.

Product Information

Darts Bundle

Introducing the Darts Board Bundle – a complete setup designed to elevate your darts experience at home. This bundle includes a premium darts board, a sturdy, adjustable stand, and a professional darts mat for floor placement, allowing for accurate throw line positioning and a true match-day feel. Perfect for home use, events, or portable play, the bundle delivers convenience, stability, and reliable performance, letting you enjoy the game at its best.

SKU: 216272,216275

	Dartboard
Dimensions: (L x W x H)	45.5 x 45.5 x 4.4 cm
Weight: (Kg)	3.9kg

GPSR Information

Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG
Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England, +441347878880

Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands +441347878880
Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands, +44134787888

Safe Working Practice

Please read through the Safe Working Practice to ensure prevention of injury or damage to the device.

•Not suitable for use by children under the age of 16.

• Always handle darts with care, keeping the points directed away from yourself and others at all times.

• Never allow children to use the darts or dartboard without close adult supervision.

• Store all darts securely in a protective case or container when not in use to prevent accidental injury.

• Ensure the dart mat is laid completely flat before play, with no creases or folds that could cause tripping.

• Do not place the dart mat on slippery, unstable, or uneven surfaces, as this may cause loss of balance or falls.

• Keep the entire playing area clear of clutter, cables, and other trip hazards before, during, and after use.

• Only the player currently taking a turn should be in the throwing zone; all other persons should stand well clear.

• Do not attempt to retrieve darts from the board or surrounding area until all darts in the round have been thrown.

• Stand at a safe distance when darts are in use to avoid injury from rebounding or errant throws.

• Inspect the dartboard, darts, mat, and surround regularly for signs of wear or damage; discontinue use immediately if defects are found and seek manufacturer guidance.

• Do not exceed the intended use of the product—this darts bundle is designed for recreational indoor play only and should not be used for any other purpose.

• Position the dartboard at a height and location that ensures stability and prevents accidental falls or detachment from the wall.

• Use only suitable wall fixings and follow the installation instructions carefully to ensure the dartboard and surround are securely mounted.

• Dispose of worn or damaged components responsibly and in accordance with local waste disposal regulations.

Parts

Dartboard Parts - Dartboard

Dartboard Parts - M4X27 Screw

Dartboard Parts - M4X14 Screw

Dartboard Parts - Foot Pad

Dartboard Parts - Nail

Dartboard Parts - Bracket

Dartboard Parts - Surround

Dartboard Parts - Barrel

Dartboard Parts - Shaft Flight (Red)

Dartboard Parts - Shaft Flight (Blue)

Stand

Mat

1. Determining Bullseye Height

1\) Determine the position for the dartboard's bullseye, as per the diagram.

2\) Install the mounting brackets (6) at the determined location on the wall.

3\) Ensure it is installed with the opening part facing upwards.

2. Attaching to the Wall

1\) Attach the Centre Screw M4X27 (2) to the bottom hole in the centre of the back of the dartboard. Leave a 3–8 mm gap between the screw head and the back of the board to allow it to hook securely onto the wall-mounted brackets.

2\) If needed, attach the Foot Pads (4) using the Nails (5) to cushion and stabilize the dartboard.

3. Attaching to the Wall

1\) Attach the dartboard to the Bracket (6) with the M4X27 Screw (2) which is on the back of the dartboard. The dartboard can rotate around the centre screw as an axis. If certain areas become excessively worn through use, you can rotate the dartboard to change the target area and distribute wear.

4.

Attach the surround to the dartboard, as per the diagram.

5.

To assemble the Dartboard stand:

Firstly, pull open the stand's three feet and the main pole (see figure 1-1) and insert two pins (see figure 1-2).

6.

Pull the main pole to the desired position (see 2-1) and tighten using the hand screw (see 2-2).

7.

Fix the dartboard to the stand's top pole using the three screws provided (x2 M4X20 & x1 M4X25) (see 3-1 and 3-2).

8.

Insert the top part into the pole of the base (see 4-1) and tighten using the clamping screw (see 4-2).

9.

Ensure you have read and fully understood the instruction manual and safety advice before using this product.
Store all components indoors in a dry, temperature-controlled environment when not in use to prevent moisture damage, warping, or material degradation.
Keep the dartboard out of direct sunlight, damp areas, and unventilated spaces, as exposure to humidity or heat can damage sisal fibres and MDF backing.
To clean the dartboard, use a soft, dry brush or cloth to remove dust and debris. Do not use water or cleaning products, as moisture will damage the sisal.
Rotate the dartboard regularly (if the model supports it) to promote even wear across all sections and extend its lifespan.
Wipe darts clean after each use with a dry cloth to remove residue from the tips and shafts. Avoid using liquids or abrasive cleaning tools.
Inspect dart flights and shafts regularly; clean lightly with a damp cloth if needed and allow to dry fully before reuse.
Store darts in a protective case when not in use to prevent physical damage or injury from exposed tips.
Clean the dartboard surround with a damp cloth and mild detergent if necessary. Avoid soaking or applying water to seams or joints.
Inspect the surround for cracks or deformities and avoid bending or placing heavy items on it when stored.
Wipe the darts mat clean with a damp cloth and allow it to dry completely before rolling or storing. Do not machine wash, tumble dry, or soak.
Always lay the mat flat during use to prevent creases and curling that could lead to trips or premature wear.
Check the dartboard stand regularly for dirt or rust on iron components; clean with a dry or lightly damp cloth and dry thoroughly to prevent corrosion.
Tighten any screws or bolts on the stand as needed to ensure ongoing stability and prevent loosening through regular use.
Do not use solvents, bleach, or abrasive pads on any parts of the darts bundle, as these can damage surface finishes on MDF, plastics, and textiles.
Keep the playing area clean and free from dust or clutter, as this helps reduce dirt transfer to the mat and maintains an optimal playing environment.

10.

WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?

If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.

FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.