Dog Run Panel

This guide provides step-by-step instructions for assembling components and using your Monster Shop Dog Run.

Product Information

The galvanised steel dog run panel system provides a secure and durable outdoor enclosure solution for domestic dogs. Available in multiple panel widths, optional integrated doors and two bar spacing options, the modular design allows users to create a customised enclosure suitable for different outdoor spaces. The galvanised steel construction provides improved resistance to outdoor conditions when correctly installed, maintained and used as intended.

SKU	213395-213400, 213403-213408

Dog Run Panel

EN

Safety Information

Safety Advice

• Ensure you have read and fully understood the instruction manual and safety advice before using this product.

• This product is intended solely for creating a secure outdoor enclosure for domestic dogs and must not be used for any other purpose.

• This product is intended for use by competent adults only. Children and unauthorised persons must not assemble, modify or operate the dog run without supervision.

• Select the correct panel spacing based on the size, breed and behaviour of the dog being housed. Incorrect spacing may allow animals to escape or create a risk of trapping paws, limbs or other body parts.

• Do not use the dog run for animals that may fit through the panel gaps or become trapped between the bars.

• Before assembly, inspect all panels, doors, brackets, fixings and components for damage, sharp edges, defects or missing parts.

• Wear suitable protective gloves and appropriate footwear when handling and installing panels to reduce the risk of cuts, abrasions or impact injuries.

• Handle panels carefully during installation and avoid contact with exposed edges or unfinished metal surfaces. The risk assessment identifies sharp edges, burrs and unfinished metal surfaces as a foreseeable hazard during assembly or handling.

• Do not use panels or components if sharp edges, damage or defects are identified.

• Install the dog run on a suitable stable and level surface capable of supporting the structure securely.

• Secure all panels using the supplied brackets and fixings, ensuring all bolts and connections are correctly tightened before use.

• Do not use the enclosure until all panels, supports and fixings have been fully installed and checked.

• Regularly inspect fixings, connections and support components to ensure they remain secure.

• Do not modify the structure, remove support components, drill additional holes or make alterations that could affect stability.

• A poorly installed or unsecured enclosure may collapse, detach or allow animals to escape. The risk assessment identifies panel instability, collapse or detachment due to incorrect installation or insufficient fixing as a foreseeable hazard.

• Keep fingers, hands, paws and limbs clear of panel joints, gaps, hinges and moving gate components during assembly and operation.

• Do not allow children to play with the gate, climb on the panels or use the enclosure as play equipment.

• Check that the gate operates correctly before allowing animals into the enclosure.

• Ensure the gate latch is fully engaged before leaving animals unattended.

• Regularly inspect the gate hinges, latch and fixings for wear, damage or loosening.

• Do not use the dog run if the gate cannot be securely closed or if any locking components are damaged.

• Ensure the enclosure size and configuration are suitable for the dog using it.

• Do not leave dogs unattended if they repeatedly attempt to climb, chew, force or damage the enclosure.

• Regularly check for damage caused by animal behaviour, including bent panels, damaged fixings or weakened sections.

• Inspect the galvanised coating regularly for damage, corrosion or areas where steel has become exposed.

• Remove dirt, debris and moisture-retaining materials from the panels and fixings to help prevent corrosion.

• Do not use damaged or corroded panels, fixings or structural components.

• Repair or replace damaged components before allowing continued use.

• Position the dog run away from hazards that may encourage climbing, escape attempts or impact damage.

• Do not use the dog run as a barrier, storage structure, shelter or restraint system for purposes other than containing suitable domestic dogs.

• Use appropriate lifting techniques when moving panels during installation.

• Larger panels should be lifted and positioned by two people where required to reduce the risk of manual handling injuries.

• Keep the assembly area clear of obstacles, tools and packaging materials during installation.

• Do not allow children or animals into the installation area while the dog run is being assembled.

• Dispose of damaged components and packaging responsibly in accordance with local waste regulations.

• Retain product information, purchase records and supplier details for traceability purposes.

GPSR Information

UK GPSR Information

Manufacturer Monster Group UK Limited
Monster House 19-23 Alan Farnaby Way
Industrial Estate Sheriff Hutton
York YO60 6PG
England
+441347878880

Representative Rana Harvey
Monster House 19-23 Alan Farnaby Way
Industrial Estate Sheriff Hutton
York YO60 6PG
England
+441347878880

EU GPSR Information

Manufacturer Monster Group BV
Van Heemskerckweg 28A & B
-
Venlo 5928LL
Netherlands
+441347878880

Representative Rana Harvey
Van Heemskerckweg 28A & B
-
Venlo 5928LL
Netherlands
+441347878880

Included Parts

1x Dog Run Panel

2x M8*70 Carriage Bolt

2x M6*50 Ground Bolt

2x Washers

2x L Shaped Brackets

2x Top Caps

Monster Manual

Assembly

1. To Attach the Panels Together

Use the Dog Run Bolts to attach the panels to each other at the upper section and lower section of the panel.

2. To Attach the Panel to the floor

Use the L-Shaped Bracket placed against the floor and the lower section of the Panel.
Use a Bolt with a Washer and bolt into the ground and connect to the Dog Run Panel.

Maintenance

Regularly inspect all panels, doors, brackets, fixings and connections for signs of damage, loosening, corrosion or wear.
Tighten loose bolts and fixings where required.
Check the gate latch and hinges regularly to ensure safe and reliable operation.
Clean the galvanised steel panels regularly to remove dirt, debris and contaminants that may contribute to corrosion.
Inspect the galvanised coating after impacts or damage and repair exposed areas where necessary.

Troubleshooting

Please read through the guide below if you have any issues or faults with your device. The information covers and resolves the majority of frequently asked questions.

Q: There are parts missing from my order.

A: If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.

For all other issues please contact our Customer Support department via the details on the Contact page.