1. Product Features
A. Foam Tubing
B. Knotted Netting
C. Coated Steel Tubing
D. Inner Impact Knotted Netting
E. Target
Instructions by
monstershop
Golf Practice Cage and Net
Perfect your swing at home with this 3x3x3m golf practice cage. Features UV-stabilised impact netting, sturdy steel frame with EVA foam, realistic turf mat, and rubber tee. Includes a bullseye target and ground fixings—ideal for all skill levels. Easy setup
Product Information
Golf Practice Cage and Net
A portable golf cage & net is an ideal option for all golfers to perfect their swings in the garden and lower that handicap.
Made using a durable coated 32mm steel frame with UV stabilised PE 30ply 1" knotted netting with an inner impact net for exceptional reliability.
View product (opens in new tab) - SKU
- 211005
- Dimensions
- 3m x 3m x 3m
| Component | Material |
| Frame | 32mm Coated Steel |
| Netting | PE 30ply 1” knotted |
GPSR Information
UK
Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG
Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England, +441347878880
EU
Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands +441347878880
Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands, +44134787888
Parts
Pole 1
Pole 2
2-Way Connector
3-Way Connector
Outer Net
Inner Impact Net
Target
Hook-and-loop Strips
Mat and Rubber Tee
Soft Ground 'U' Pegs
Hard Ground Bracket
2. Laying Out Parts
- Lay out steel poles (foam tubes already added for quicker assembly) and corner pieces.
- Check all parts match the parts list and are free from defects.
3. Connecting Poles
- Connect a Pole 1 to either side of Pole 2.
- Repeat to make 11 full size poles.
4. Assembling the Top Frame
- Use 4 x 3-way connectors and 4 x full size poles to assemble the top of the frame.
5. Placing Corner Poles
- Place full size poles in each of the corner connectors.
6. Assembling the Bottom Frame
- Use the remaining 2 x 3-way connectors, 2 x 2-way connectors, and 3 x full size poles to assemble the bottom part of the frame.
7. Attaching Bottom to Top Section
- Attach the bottom section to the already made top section.
8. Attaching the Cage Net
- Attach the cage net to the inside of the frame using hook-and-loop strips.
9. Attaching Impact Netting
- Attach impact netting approximately 1 ft from the back using the ties.
- Next, attach the impact netting to the side and base.
10. Attaching the Target
- Attach the target to the top back corners.
- Adjust as required.
11. Resolution Guide
- WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?
If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.
FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.