Instructions by

monstershop

KuKoo 1200mm Trough Sink

This guide provides step-by-step instructions for assembling components and using the KuKoo 1200mm Trough Sink.

Product Information

KuKoo 1200mm Trough Sink

The KuKoo 1200mm Trough Sink is designed for commercial and high-use environments, combining durable and hygienic stainless steel 304 construction with a sleek, easy-to-clean design. The integrated mixer allows for adjustable water temperature, while the included non-concussive taps and soap dispensers ensure controlled, low maintenance operation.

SKU: 217396

Specifications:	Attribute:
External Width:	1200mm
External Height:	310mm
External Depth:	410mm
Internal Width:	1190mm
Internal Height (non plug end):	200mm
Internal Height (plug end):	210mm
Internal Depth:	300mm

GPSR Information

Manufacturer:

Monster Group UK Limited, Monster House

19-23 Alan Farnaby Way,

Industrial Estate Sheriff Hutton,

York

YO60 6PG

Person Responsible:

Rana Harvey, Monster Group UK Limited,

Monster House

19-23 Alan Farnaby Way,

Industrial Estate Sheriff Hutton,

York

YO60 6PG,

England,

+441347878880

Manufacturer:

Monster Group BV,

Van Heemskerckweg 28A & B,

Venlo 5928LL

Netherlands

+441347878880

Person Responsible:

Rana Harvey,

Monster Group BV,

Van Heemskerckweg 28A & B,

Venlo 5928LL,

Netherlands,

+441347878880

Safety Advice

Only install and use this product in accordance with all applicable local plumbing and building regulations.
This product is intended for indoor commercial, industrial, or high-traffic public use and must be installed by a qualified professional.
Always ensure the mixer valve is functioning correctly before use to avoid the risk of scalding.
Check that water temperature limits have been correctly set and clearly labelled during installation.
Warn users that hot water may still cause scalding, even when temperature is adjusted; instruct users to test water before use.
Do not tamper with or modify the mixer valve or water supply setup; this may result in injury, leaks, or malfunction.
Push taps require moderate force to operate. Supervise or assist vulnerable users such as elderly individuals or children who may struggle to activate the taps.
Warn users that corners and edges of the stainless steel sink may be sharp; avoid leaning or placing weight on the sink edges to prevent injury.
Install anti-slip flooring or mats around the sink area to reduce the risk of slipping on splashed water.
Instruct all users to promptly wipe up any water spills on the floor to prevent accidents.
Clean and disinfect the sink, taps, and soap dispensers frequently to prevent bacterial contamination.
Do not block or obstruct drainage outlets, as this may cause overflowing and increase slip hazards.
Ensure the included stainless steel soap dispensers are cleaned and refilled regularly to avoid clogging and bacterial buildup.
Check all fixings, taps, valves, and seals regularly for signs of wear, leaks, or corrosion. Replace worn parts immediately.
Do not use abrasive or corrosive cleaning products on any stainless steel surfaces, as this may damage the protective finish.
This product must not be used by unsupervised young children or individuals unable to understand proper use.
Ensure the unit is anchored securely to prevent tipping, movement, or instability during use.
Avoid placing any heavy objects in or on the sink which could damage the structure or compromise stability.
Product is not suitable for use in freezing conditions or outdoor environments; ensure water lines are protected from frost damage.
Dispose of the product in accordance with local waste disposal regulations. Stainless steel components may be recyclable.
Keep packaging materials away from children. Plastic bags and small parts can pose a choking or suffocation hazard.

Parts

Trough Sink

Valve

Tap

Waste Pipe

Screws

Wall Plugs

1. Installing the Trough Sink

The left hand side of the valve is the feed for the water water, whereas the right hand side of the valve is the feed for the cold water. Insert the centre of the valve into the bottom of the tap to combine the hot and cold water.

Install the trough sink onto the wall using the screws provided.

Install the waste pipe underneath the trough sink.

2. Maintenance

Inspect the mixer valve every 6 months to ensure correct operation and safe water temperature blending.
Wipe down stainless steel surfaces daily with a soft cloth and mild detergent to maintain hygiene and finish.
Clean and descale taps and soap dispensers at least monthly, or more frequently in hard water areas.
Check all plumbing connections and seals quarterly for leaks or signs of wear, tightening or replacing components as necessary.
Reapply any temperature labelling or usage signage that becomes worn or illegible.
Perform a full functionality check of all components annually, including soap dispenser pumps, non-concussive tap springs, and temperature control valve.

3.

Please read through the guide below if you have any issues or faults with your device. The information covers and resolves the majority of frequently asked questions.

Q: There are parts missing from my order. A: If there appears to be any part missing from your package contact our Customer Support team via the details on the Contact Us page within 7 days of receipt.

For all other issues please contact our Customer Support department via the details on the Contact page.