{
  "schema": "stepacross.manual.v1",
  "slug": "l-shaped-camper-van-bed",
  "lang": "en",
  "title": "L-Shaped Camper Van Bed",
  "description": "214282",
  "status": "public",
  "chapters": [
    {
      "infos": [
        {
          "title": "Safe Working Practice",
          "text": "*   Be careful when lifting and assembling the components as they are quite fragile and heavy.\n*   There may be debris and/or sawdust in the pre-drilled holes. Remove this before commencing with assembly. Use gloves to remove it.\n*   Make sure each component is properly and securely locked before continuing with the assembly process.\n*   Collect all necessary tools and materials for assembly. Ensure you have all the fixings provided with the product.\n*   You need two people when assembling/dismantling and moving the L-Shaped Camper Van Bed.\n*   Make sure you apply a primer before painting the L-Shaped Camper Van Bed.\n*   We strongly recommend the use of respiratory PPR (rated P2 as a minimum) when cutting, sanding or drilling this product to prevent inhalation of harmful dust.\n*   Ensure any modifications are made in the open air, a safe distance away from others.",
          "type": "Safety"
        },
        {
          "title": "When Using the Bed",
          "text": "*   Perform a final check to ensure all components are securely fastened. Verify that the bed extends and retracts smoothly. Ensure the bed is stable and can support the maximum weight capacity of 300kg.\n*   Ensure the L-Shaped Camper Van Bed is only used indoors.\n*   Do not exceed the advised maximum weight capacity of 300kg.\n*   Use appropriate cleaning products to clean the L-Shaped Camper Van Bed.",
          "type": "BestPractices"
        },
        {
          "title": "GPSR Information\n",
          "text": "**UK**\n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n\n",
          "type": "Gpsr"
        }
      ],
      "steps": [
        {
          "number": 1,
          "description": "Begin by inserting all Connecting Bolts (A) into the pre-drilled holes on Part (1) and Part (3).\n\nNext, use Screws (F) to attach 90° Hinges (K) onto Part 1. Ensure the hinges are flush with the surface and aligned correctly, as these will support the lift-up lid mechanism.",
          "images": [
            {
              "path": "images/834a9691de8dd2da.jpg"
            }
          ],
          "title": "Prepare the Front and Back Rails"
        },
        {
          "number": 2,
          "description": "Lay Part (10) flat on a surface and insert Connecting Bolts (A) into its side edges. Attach the Doors (11) inside the cutouts using 90° Hinges (K) and secure them with Screws (F).\n\nThen, position four Support Blocks (D) inside the panel near the corners of the cutouts and screw them in with Screws (G).\n\nThese elements will reinforce and support the doors.",
          "images": [
            {
              "path": "images/b619c6493dd87c55.jpg"
            }
          ],
          "title": "Assemble the Doors"
        },
        {
          "number": 3,
          "description": "Position Part (6) and insert Connecting Bolts (A) into the top and side holes.\n\nThen position Part (7) and attach it with Hinges (K) secured by Screws (F). Ensure the hinges are square and allow smooth opening and closing\n\nAttach Support Blocks (D) along the interior edge of the opening using Screws (G).",
          "images": [
            {
              "path": "images/5044c63ed0197a68.jpg"
            }
          ],
          "title": "Assemble the Left Top Lid Frame"
        },
        {
          "number": 4,
          "description": "Stand up the Parts (4) and (5) and connect them to the frame using the bolts and Cam Locks (B).\n\nSlide the Inner Support Rails (8) and (9) between the panels, parallel to the floor, and lock them in with cams.",
          "images": [
            {
              "path": "images/bc053582a64d8ce5.jpg"
            }
          ],
          "title": "Build the Left Bench Frame"
        },
        {
          "number": 5,
          "description": "Take the assembled Part (10) and align it with the side panels.\n\nSecure it in place using the cam locks connected to the bolts from previous steps. Ensure all cams are locked tight and the panel is flush against the side panels.",
          "images": [
            {
              "path": "images/101751b694228268.jpg"
            }
          ],
          "title": "Install the Front Panel on Left Bench"
        },
        {
          "number": 6,
          "description": "Place Part (3) across the back edge and lock it in using Cam Locks.\n\nThen install Part (1) at the front edge using the same method.\n\nThese parts will support the mattress lid and give structure to the top.",
          "images": [
            {
              "path": "images/cf0da70655d88c67.jpg"
            }
          ],
          "title": "Install the Top Slats on Left Bench"
        },
        {
          "number": 7,
          "description": "Install the part (2) by securing it to the hinges attached to Part (3).\n\nUse Screws (F) to fix it in place.\n\nOpen and close the panel a few times to ensure the hinge movement is smooth and even.",
          "images": [
            {
              "path": "images/901995f88340087a.jpg"
            }
          ],
          "title": "Attach the Lift-Up Backrest on Left Bench"
        },
        {
          "number": 8,
          "description": "Place Parts (15) and (23) flat.\n\nScrew part (19) onto them using Screws (C), followed by part (20) at the ends.\n\nThese guides will support the sliding platform that allows the bed to extend.",
          "images": [
            {
              "path": "images/e73d782169ee8e25.jpg"
            }
          ],
          "title": "Prepare Right Bench Side Panels A"
        },
        {
          "number": 9,
          "description": "Repeat the previous step for parts (16) and (24).\n\nAlign part (19) and part (20) to match the layout of the pull-out platform.",
          "images": [
            {
              "path": "images/ab5b1942507a633a.jpg"
            }
          ],
          "title": "Prepare Right Bench Side Panels B"
        },
        {
          "number": 10,
          "description": "Insert Connecting Bolts (A) into Parts (13) and (18).\n\nAttach Support Blocks (D) using Screws (G) in the cut-out frame area.\n\nThen hinge Part (17) into the frame with Hinges (K) and Screws (F) to form the lift-up lid for the right bench.",
          "images": [
            {
              "path": "images/43358142b8c54457.jpg"
            }
          ],
          "title": "Assemble Right Bench Top Frame"
        },
        {
          "number": 11,
          "description": "Fix Part (21) (slatted platform) to Part (12) using Hinges (E) and Screws (F).\n\nThe platform should move smoothly along the hinges, allowing it to fold in and out of the bench structure.",
          "images": [
            {
              "path": "images/c0a508edcbae2387.jpg"
            }
          ],
          "title": "Build the Pull-Out Slatted Section"
        },
        {
          "number": 12,
          "description": "Position part (13) in front of the slats and attach it to the ends using Cam Locks (B).\n\nThis will stabilize the slats and form a strong frame for the pull-out section.",
          "images": [
            {
              "path": "images/cb6b30ba8d4cfd1b.jpg"
            }
          ],
          "title": "Connect Front Slat Rail"
        },
        {
          "number": 13,
          "description": "Attach part (12) (sliding rail) and part (14) (center rail) to the side panels parts (15) and (16).\n\nUse Cam Locks (B) to connect all bolts.\n\nThis forms the structural base of the right-side bench.",
          "images": [
            {
              "path": "images/7085dc6a2dc30527.jpg"
            }
          ],
          "title": "Assemble Right Bench Frame"
        },
        {
          "number": 14,
          "description": "Place part (18) over the bench frame and align the bolt holes.\n\nLock it in place using Cam Locks (B).\n\nThis lid will provide top access to the storage compartment below.",
          "images": [
            {
              "path": "images/4099c8196e8534f7.jpg"
            }
          ],
          "title": "Install Right Lift-Up Lid"
        },
        {
          "number": 15,
          "description": "Insert Connecting Bolts (A) into part (22) (slatted top) and part (25)(support base).\n\nThese two components will come together to form the full L-shaped sleeping surface when in bed mode.",
          "images": [
            {
              "path": "images/11c560b8d03623d6.jpg"
            }
          ],
          "title": "Prepare the L-Shaped Slatted Platform"
        },
        {
          "number": 16,
          "description": "Join part (25) to part (23) and part (24) using Cam Locks (B).\n\nThis frame will support the final top platform and complete the structural loop.",
          "images": [
            {
              "path": "images/003522927f150164.jpg"
            }
          ],
          "title": "Assemble the Right Frame Base"
        },
        {
          "number": 17,
          "description": "Place part (22) on top of the fully assembled structure and align it with the bolts.\n\nUse Cam Locks (B) to secure it.\n\nThe slatted surface should rest evenly across both benches.",
          "images": [
            {
              "path": "images/ea95867b7c9221f2.jpg"
            }
          ],
          "title": "Install the Slatted Top Platform"
        },
        {
          "number": 18,
          "description": "Slide the pull-out platform back inside the right bench and lower the L-shaped slatted platform part (22) into its final resting position.\n\nEnsure it aligns with the frame below and sits flush across both benches.",
          "images": [
            {
              "path": "images/233129ed4686de53.jpg"
            }
          ],
          "title": "Extend Pull-Out and Position Platform"
        },
        {
          "number": 19,
          "description": "At this stage, the L-shaped camper van bed is completely assembled.\n\nBoth the fixed and pull-out sections are securely connected, and the slatted platforms form a continuous surface.\n\nThe lift-up lids are closed, creating a unified and stable bed base with integrated access to storage underneath.\n\nThis setup is now ready for everyday use, whether as a seating arrangement during the day or a spacious sleeping platform at night.",
          "images": [
            {
              "path": "images/92a1ae4a69215f24.jpg"
            }
          ],
          "title": "Fully Assembled View"
        }
      ],
      "sections": [
        {
          "images": [],
          "title": "What do I do if there are missing parts from my order?",
          "description": "If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.\n\n**For all other issues, please contact our customer support team.**"
        }
      ],
      "materials": {
        "items": [
          {
            "name": "Box A: Part 1 – Left Bench Front Rail"
          },
          {
            "name": "Box A: Part 2 – Left Bench Lift-Up Lid"
          },
          {
            "name": "Box A: Part 3 – Left Bench Back Rail"
          },
          {
            "name": "Box A: Part 4 – Left Bench Side Panel (Front)"
          },
          {
            "name": "Box A: Part 5 – Left Bench Side Panel (Back)"
          },
          {
            "name": "Box A: Part 6 – Left Bench Top Frame (Surround)"
          },
          {
            "name": "Box A: Part 7 – Door (Left Bench)"
          },
          {
            "name": "Box A: Part 8 – Left Bench Inner Support Rails"
          },
          {
            "name": "Box A: Part 9 – Left Bench Center Rail"
          },
          {
            "name": "Box A: Part 10 – Left Bench Front Panel with Cutouts"
          },
          {
            "name": "Box A: Part 11 – Doors (Left Bench)"
          },
          {
            "name": "Box B: Part 12 – Sliding Support Rail (Pull-Out Section)"
          },
          {
            "name": "Box B: Part 13 – Pull-Out Slat Front Connector"
          },
          {
            "name": "Box B: Part 14 – Right Bench Center Rail"
          },
          {
            "name": "Box B: Part 15 – Right Bench Side Panel (Front) with Cutout"
          },
          {
            "name": "Box B: Part 16 – Right Bench Side Panel (Back) with Cutout"
          },
          {
            "name": "Box B: Part 17 – Right Bench Lid Frame"
          },
          {
            "name": "Box B: Part 18 – Door"
          },
          {
            "name": "Box B: Part 19 – Slat Guides"
          },
          {
            "name": "Box B: Part 20 – Spacer Blocks for Slat Guides"
          },
          {
            "name": "Box B: Part 21 – Slatted Pull-Out Bed Platform"
          },
          {
            "name": "Box B: Part 22 – L-Shaped Slatted Top Platform"
          },
          {
            "name": "Box B: Part 23 – Right Bench Rear Panel"
          },
          {
            "name": "Box B: Part 24 – Right Bench Inner Back Panel with Slat Tracks"
          },
          {
            "name": "Box B: Part 25 – L-Shaped Support Frame (Final Platform Base)"
          },
          {
            "name": "Box A: Part A - Connecting Bolt",
            "image": {
              "path": "images/4844dae62a20dfb7.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box A: Part B - Cam lock",
            "image": {
              "path": "images/79dd54223b750c74.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box A: Part D - Support",
            "image": {
              "path": "images/0f976141d038afbc.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box A: Part F - Screw 4 x 12mm",
            "image": {
              "path": "images/d24c9b0a98559193.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box A: Part G - Screw 3.5 x 25mm ",
            "image": {
              "path": "images/775cf00a9fc7eebf.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box A: Part H - Corner Bracket ",
            "image": {
              "path": "images/7a8b2f5d05089e0e.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box A: Part K - 90º Hinge",
            "image": {
              "path": "images/a1308be295c3bf43.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part A - Connecting Bolt",
            "image": {
              "path": "images/4844dae62a20dfb7.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part B - Cam lock",
            "image": {
              "path": "images/79dd54223b750c74.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part C - Screw 3.5 x 20mm",
            "image": {
              "path": "images/775cf00a9fc7eebf.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part D - Support",
            "image": {
              "path": "images/0f976141d038afbc.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part E - Hinge",
            "image": {
              "path": "images/6debc93c369de78f.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part F - 4x 12mm Screw",
            "image": {
              "path": "images/d24c9b0a98559193.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part G - 3.5x25mm Screw",
            "image": {
              "path": "images/775cf00a9fc7eebf.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part H - Corner Bracket",
            "image": {
              "path": "images/7a8b2f5d05089e0e.jpg",
              "alt": ""
            }
          },
          {
            "name": "Box B: Part K - 90º Hinge",
            "image": {
              "path": "images/a1308be295c3bf43.jpg",
              "alt": ""
            }
          }
        ],
        "title": "Parts"
      },
      "tools": {
        "items": [
          {
            "name": "Cross Head Screwdriver"
          },
          {
            "name": "Gloves"
          },
          {
            "name": "Respiratory PPR (rated P2 as a minimum)"
          }
        ]
      },
      "productInfo": {
        "characteristics": [
          {
            "label": "Dimensions",
            "value": "Length: 1800mm, Height: 405mm, Depth: 650mm (Extends to 1100mm), Total bed size: 1800mm x 1200mm"
          },
          {
            "label": "Weight",
            "value": "42kg (50kg including Cushions)"
          },
          {
            "label": "Materials",
            "value": "15mm Birch Plywood "
          },
          {
            "label": "Capacity",
            "value": "Maximum Weight Capacity: 300kg"
          },
          {
            "label": "SKU",
            "value": "214282"
          }
        ],
        "variations": [
          {
            "name": " ",
            "value": " "
          },
          {
            "name": "Total bed size",
            "value": "1800mm x 1200mm"
          },
          {
            "name": "Seat Cushion Dimensions",
            "value": "1800 (L) x 670 (D) x 75mm (H)"
          },
          {
            "name": "Back Cushion Dimensions",
            "value": "1800 (L) x 650 (D) x 75mm (H)"
          },
          {
            "name": "Cushion Material",
            "value": "90 High-density Sponge Base with Linen Cover"
          },
          {
            "name": "Wheel arch clearance",
            "value": "up to 350mm at the back of the bed"
          }
        ],
        "name": "L-Shaped Camper Van Bed",
        "label": "View product",
        "description": "This Monster Shop high-quality L-Shaped Camper Van Bed is designed to be used as a sofa bed.\n\nThis L-Shaped Camper Van Bed provides two large storage compartments under the seats and features two storage nets to provide plenty of space to house all your camping essentials.\n\nThis product is flat-packed, and is ideal for DIY van conversions and is supplied with all the fixings required for self-assembly. The L-Shaped Camper Van Bed is made from strong and resistant Birch Plywood with an unfinished surface ready for you to customise."
      }
    }
  ],
  "cover": {
    "title": "L-Shaped Camper Van Bed",
    "description": "214282",
    "image": {
      "path": "images/296233468f7db4a5.jpg",
      "alt": ""
    }
  }
}