{ "schema": "stepacross.manual.v1", "slug": "maxblast-gutter-vacuum-camera", "lang": "en", "title": "MAXBLAST Gutter Vacuum Camera", "description": "Instructions for assembling, installing, and using the MAXBLAST Gutter Vacuum Camera. It includes safety advice, operational guidelines, and maintenance tips.", "status": "public", "chapters": [ { "infos": [ { "title": "Safety Advice ", "text": "**Ensure you have read and fully understood the instruction manual and safety advice before using this product.**\n\n* Before each use, visually inspect all components—including the camera, waterproof case, phone holder, camera attachment, and both pole attachments—for signs of damage, looseness, or wear; do not use the product if any component is compromised.\n* Ensure the camera, phone holder, and all attachments are securely fastened to the pole before lifting or operating the system; loose fittings can result in components falling and causing injury or damage.\n* Always ensure the waterproof case is fully sealed before use to prevent moisture ingress and potential short-circuiting of the camera; in wet weather, take additional care to protect your mobile device if it does not have waterproof features or casing.\n* Maintain a safe working distance of at least 10 metres from all overhead power lines to eliminate the risk of electrocution.\n* Conduct a site survey before operation to identify electrical hazards, unstable surfaces, or other environmental risks.\n* Avoid using the product near pedestrians or passers-by unless safety barriers or warning signage are in place to prevent injury from falling equipment.\n* Limit continuous screen viewing to reduce the risk of eye strain or disorientation; take regular breaks and adjust phone brightness according to ambient light conditions.\n* When attaching or removing the camera, ensure it is done at a safe and manageable height to avoid strains or falls.\n* Follow safe manual handling practices when lifting or positioning the pole; if the setup requires reaching above shoulder height or over obstacles, use a second person to assist.\n* Do not use the pole or attachments for any purpose other than those specified in the instruction manual.\n* Ensure the pole is stable and securely supported when in use; do not overextend or use on uneven ground without proper stabilisation.\n* Store all components in a clean, dry environment to prevent corrosion or material degradation.\n* Perform regular inspections of all pole attachments, camera fittings, and waterproof seals to ensure long-term safety and integrity.\n* If WiFi connection fails during operation, lower the pole carefully before attempting to re-establish the link or inspect the device.\n* Do not attempt to repair or modify the camera system or attachments; always use manufacturer-approved parts and follow approved procedures.\n* Dispose of electronic components in accordance with local environmental regulations.\n\n \n", "type": "Safety" }, { "title": "GPSR Information\n", "text": "**UK**\n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n\n", "type": "Gpsr" } ], "steps": [ { "number": 1, "description": "1. Insert MicroSD Card (for this 4K action camera , it support the Max 64GB SD card, other high-capacity memory cards are not supported.)\n2. Charge Battery via USB cable connected to a PC or power adapter.\n\n* You can record while charging.\n\n* Use a 5V 1-2A power source (charger, power bank, or car adapter).\n\n", "images": [], "title": "Getting Started " }, { "number": 2, "description": "* **Power On/Off:** Press and hold the Mode/Power button for 3-5 seconds to turn the camera on or off.\n\n
\n\n", "images": [], "title": "Power On/Off" }, { "number": 3, "description": "After powering on, short-press the Power/Mode button to cycle through modes:\n\n* Video → Photo → Slow Motion → Playback → Settings.\n\n", "images": [], "title": "Mode Switching" }, { "number": 4, "description": "* When finished in **Settings Mode**, select  **\"Exit Settings (X)\"** and press the **OK** button to return to **Video Mode.**\n\n", "images": [], "title": "Exiting Settings Mode" }, { "number": 5, "description": "* Available recording modes: **Normal Recording / Loop Recording / Time-Lapse** \n* To start recording: press the **OK** button while in **Video Mode** (indicator light blinks).\n* To stop recording: press **OK** button again (indicator light turns off).\n\n", "images": [], "title": "Video Recording " }, { "number": 6, "description": "* Photo options include: **Normal Shooting / Self-Timer / Auto Capture / Motion Trail Capture**\n\n- In Photo Mode, a camera icon appears in the top-left corner.\n\n- Press the **OK** button to take a photo. \n\n", "images": [], "title": "Photo Mode" }, { "number": 7, "description": "* Available resolutions: \n\n * **1080P @ 60fps** \n\n * **720P @ 120fps**\n\n* In Slow Motion Mode, a slow-motion icon appears in the top-left corner.\n\n* Press **OK** button to start recording (indicator blinks); press again to stop.\n\n", "images": [], "title": "Slow Motion Mode" }, { "number": 8, "description": "* Connect the action camera to a PC via USB cable, or\n\n- Remove the MicroSD card and use an SD card reader. \n\n- This allows you to export photos and videos.\n\n \n", "images": [], "title": "Data Transfer" }, { "number": 9, "description": "1. Install the **XDV App** on your smartphone:\n\n * **Android:** Download from Google Play \n\n * **iOS:** Download from the App Store\n\n * Requires Android 4.1+ or iOS 7.0+\n2. Turn the camera on. Press the '**UP**' key. A Wi-Fi message will appear, and the Wi-Fi indicator will flash. \n3. On your phone, open **Wi-Fi settings,** find and connect to \"**sport-camera\"**.\n\n * Default password: **1234567890**\n4. Open the **XDV App.** Through the app you can: \n\n * Preview the live camera view\n\n * Start/stop video recording \n\n * Take photos remotely \n\n * Play back, download, delete, or share files\n\n", "images": [], "title": "Wi-Fi Setup & Use " }, { "number": 10, "description": "* **Clean the Camera Lens and Waterproof Case Regularly**\\\n After each use, wipe the camera lens and the inside and outside of the waterproof case with a clean, dry, non-abrasive cloth to remove dust, watermarks, or debris. Avoid using chemicals or abrasive cleaners. \n\n- **Inspect and Clean Attachment Points**\\\n Check all connection points (camera mount, phone holder, pole attachments) for dirt, corrosion, or wear. Clean these areas gently and ensure no debris interferes with locking mechanisms.\n\n- **Check for Cracks or Wear on the Waterproof Case Seal**\\\n Examine the rubber seal or gasket around the waterproof case for any cracking, brittleness, or deformation. Replace the seal if damaged to maintain water resistance.\n\n- **Monitor Wi-Fi Signal and Battery Health**\\\n Ensure the Wi-Fi connection is reliable during use. If you notice frequent disconnections or reduced range, check the battery level and recharge fully. If the battery no longer holds charge, replace it.\n\n- **Inspect Pole Attachments**\\\n Before each use, test the pole attachments for tightness and stability. Ensure locking mechanisms hold securely. Tighten screws or clamps if needed.\n\n- **Test Camera Function Before Use**\\\n Power on the camera and connect it to the mobile device via WiFi before extending the pole. Confirm that the video feed is stable and responsive. Resolve any connection issues before working at height.\n\n- **Store Components Properly** \\\n Store the camera, waterproof case, phone holder, and attachments in a dry, dust-free environment, ideally in a padded or protective case. Avoid high humidity, direct sunlight , and heat sources.\n\n- **Perform a Monthly System Check**\\\n Once a month, fully assemble the system to check for wear, loose parts, or functional issues. Use this time to clean all components thoroughly and confirm proper operation.\n\n- **Keep Software Updated**\\\n Regularly check your mobile app for updates via your phone's app store. Updates improve compatibility, security, and features.\n\n- **Use Manufacturer-Approved Parts Only** \\\n If any component is damaged or worn, do not attempt to repair or replace it with non-original parts. Please contact us for approved replacement parts. \n\n \n", "images": [], "title": "Maintenance" }, { "number": 11, "description": "* **WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?**\n\nIf there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.\n\n* **FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.**\n", "images": [], "title": "Troubleshooting" } ], "sections": [], "materials": { "items": [ { "name": "Camera", "image": { "path": "images/bfa978f069e6670e.jpg", "alt": "" } }, { "name": "Waterproof Case", "image": { "path": "images/3b588d8e1fd095eb.jpg", "alt": "" } }, { "name": "USB-C Cable ", "image": { "path": "images/c4449a6a1208bd71.jpg", "alt": "" } }, { "name": "Carry Bag", "image": { "path": "images/f8e4a35251c3786e.jpg", "alt": "" } }, { "name": "Phone Mount ", "image": { "path": "images/070268fce29798d5.jpg", "alt": "" } }, { "name": "Pole Mount ", "image": { "path": "images/fe6d0093647798b9.jpg", "alt": "" } }, { "name": "Camera Mount ", "image": { "path": "images/777dbc3a9f5500b5.jpg", "alt": "" } }, { "name": "Wireless Remote ", "image": { "path": "images/ef4d3446035cdde7.jpg", "alt": "" } } ], "title": "Parts" }, "productInfo": { "characteristics": [ { "label": "SKU", "value": "215801" } ], "variations": [ { "name": " ", "value": "215801" }, { "name": "Screen Resolution", "value": "2MP" }, { "name": "Frame Rate", "value": "30 fps" }, { "name": "Camera Resolution", "value": "4K" }, { "name": "Waterproof (with case)", "value": "30M " }, { "name": "Charging Method", "value": "Type-C Port" }, { "name": "Battery/Capacity/Life", "value": "3.7v rechargeable battery, 1350 mAh battery , 90-120 minutes " }, { "name": "Loop Recording", "value": "2min / 3min / 5min" }, { "name": "Dimensions", "value": "59x41x54mm" }, { "name": "Weight", "value": "60g" }, { "name": "Screen", "value": "2 inch front screen + 1.3 inch back screen" }, { "name": "Zoom Capability", "value": "1x up to 4x" }, { "name": "Wireless Transmission Range", "value": "50m+" }, { "name": "Wireless Type ", "value": "WiFi" }, { "name": "Operating Temperature Range", "value": "-20° to +60°" }, { "name": "Pole Compatibility Range", "value": " Max 5.5cm" }, { "name": "SD Card", "value": "64GB SD Card (max)" } ], "name": "MAXBLAST Gutter Vacuum Camera", "description": "Introducing the Gutter Vacuum Camera – a practical visual aid designed to enhance gutter cleaning efficiency and accuracy. This camera attaches securely to the top of your gutter vacuum system, providing a live view of the cleaning process directly to your mobile phone. Supplied with both camera and phone attachments, the setup allows you to mount your phone conveniently at the base of the pole while the camera monitors the action from above, ensuring clear visibility and more precise results without the need for ladders." } } ], "cover": { "title": "MAXBLAST Gutter Vacuum Camera", "description": "Instructions for assembling, installing, and using the MAXBLAST Gutter Vacuum Camera. It includes safety advice, operational guidelines, and maintenance tips.", "image": { "path": "images/7a868e0a59a770d3.jpg", "alt": "" } } }