{
  "schema": "stepacross.manual.v1",
  "slug": "metal-wheelie-bin-storage-single",
  "lang": "en",
  "title": "Metal Wheelie Bin Storage - Single",
  "description": "This guide provides step-by-step instructions for assembling, operating, and maintaining your Metal Wheelie Bin Storage - Single.",
  "status": "public",
  "chapters": [
    {
      "infos": [
        {
          "title": "Safety Advice\n",
          "text": "* Ensure you have read and fully understood the instruction manual and safety advice before using this product.\n* This product is intended solely for the outdoor storage of standard household wheelie bins and must not be used for any other purpose.\n* This product is designed for use by competent adults and must not be used by children without supervision.\n* Keep children and pets away during assembly due to heavy components, sharp edges, and small parts.\n* Assemble the unit strictly in accordance with the instructions provided in the assembly manual, ensuring all components are correctly positioned and securely fastened.\n* Always assemble the product on a stable, flat surface to prevent parts from slipping or causing injury.\n* Wear protective gloves during assembly and handling to reduce the risk of cuts from metal edges.\n* Inspect all panels and components for sharp edges or damage before assembly; do not use if defects are identified.\n* Use appropriate tools suitable for assembly and ensure all fixings are securely tightened without overtightening.\n* Keep fingers clear of panel joints and connection points during assembly to avoid pinching.\n* Handle screws and fixings carefully to avoid puncture wounds; keep small parts out of reach of children.\n* Due to the size and weight of the product, at least two people are required for lifting, moving, or assembling the unit.\n* Use safe manual handling techniques: bend knees, keep back straight, and avoid twisting when lifting.\n* Do not drag the unit across the ground, as this may cause damage or injury.\n* Install the unit on firm, level ground to ensure stability and prevent tipping.\n* Secure the unit to the ground using suitable fixings to prevent movement or tipping, particularly in windy conditions.\n* Do not install on uneven or unstable surfaces.\n* Never climb, sit, or place excessive weight on top of the unit.\n* Ensure the lid is supported during installation and final positioning to prevent sudden movement.\n* The gas pistons are pre-installed and are under pressure; do not tamper with, remove, or attempt to adjust them.\n* Keep hands, fingers, and loose clothing clear of all moving parts including hinges, doors, and lids to prevent entrapment or injury.\n* Open and close lids and doors slowly and in a controlled manner; do not force movement.\n* Be aware that the lid is connected to the bin lid via a chain; ensure correct attachment and that the chain is not tangled or obstructed.\n* Do not allow children to operate the lids or doors due to risk of trapping fingers.\n* Ensure bins are correctly positioned inside the unit before use to prevent shifting or falling.\n* Open doors carefully to avoid contents falling out or causing imbalance.\n* Do not overload the unit or use it to store items other than standard wheelie bins.\n* Keep the interior clear of obstructions that may interfere with door or lid operation.\n* Use the lockable handles responsibly and keep keys out of reach of children.\n* Do not force locks or handles as this may cause damage or injury.\n* The deodoriser holder is intended only for solid deodoriser blocks; do not use liquids or chemicals that may leak or react.\n* Ensure any deodoriser used is handled in accordance with its manufacturer’s instructions.\n* Regularly inspect the unit for loose fixings, wear, corrosion, or damage, particularly after severe weather.\n* Do not use the product if any components such as hinges, doors, locks, or pistons are damaged or not functioning correctly.\n* Metal surfaces may become hot in direct sunlight or cold in low temperatures; take care when handling.\n* Do not modify the product or use non-approved replacement parts, as this may compromise safety.\n* Ensure doors and lids are closed and secured during high winds to prevent damage or injury.\n* Dispose of packaging materials safely, keeping plastic bags and small parts away from children.\n* At end of life, dispose of the product in accordance with local regulations for metal products.\n* Take care when dismantling the unit for disposal to avoid injury from sharp edges or heavy parts.\n",
          "type": "Safety"
        },
        {
          "title": "GPSR Information\n",
          "text": "**UK**\n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n",
          "type": "Gpsr"
        }
      ],
      "steps": [],
      "sections": [
        {
          "images": [
            {
              "path": "images/8fce2ec0d6dc21ba.jpg"
            }
          ],
          "title": "Install Feet\n\n",
          "description": "<br />\n\n* Firmly install Feet (Part A16) to the bottom of Side Panel Left (Part 2) and Side Panel Right (Part 3).\n\n"
        },
        {
          "images": [
            {
              "path": "images/853c3073116bd0e8.jpg"
            },
            {
              "path": "images/4503df01a38f6395.jpg"
            }
          ],
          "title": "Install Door Magnets\n\n",
          "description": "* Install the Door Magnets (Part A17) to Side Panel Left (Part 2) using Screws (Part G24).\n\n"
        },
        {
          "images": [
            {
              "path": "images/fdff8db169b35115.jpg"
            },
            {
              "path": "images/9da1a676bb803e25.jpg"
            }
          ],
          "title": "Install Bottom Frame\n",
          "description": "* Install the Bottom Frame (Part 1) to Side Panel Left (Part 2) and Side Panel Right (Part 3) using Screws (Part G25).\n\n"
        },
        {
          "images": [
            {
              "path": "images/01816fe03c227bf0.jpg"
            },
            {
              "path": "images/0a1225cdbbc8c00c.jpg"
            }
          ],
          "title": "Install Back Panel\n",
          "description": "<br />\n\n* Install the Back Panel (Part 4) to Side Panel Left (Part 2) and Side Panel Right (Part 3) using Screws (Part G24).\n\n"
        },
        {
          "images": [
            {
              "path": "images/31be248ecdfbc823.jpg"
            },
            {
              "path": "images/2c507ea89a5f1576.jpg"
            }
          ],
          "title": "Install Handle to the Top Cover\n",
          "description": "<br />\n\n* Install the Handle (Part 6) to the Top Cover Panel (Part 5) using Screws (Part G27).\n\n"
        },
        {
          "images": [
            {
              "path": "images/bc793e9ca0c6d141.jpg"
            },
            {
              "path": "images/48162ffd6acf0b2e.jpg"
            }
          ],
          "title": "Install the Top Cover Panel\n",
          "description": "Note: Ensure that you install the screws into the smaller of the two holes.\n\n* Install the The Top Cover Panel (Part 5) to the frame already built using Screws (Part G26). Please use the tool provided (Part T10).\n\n  <br />\n\n"
        },
        {
          "images": [
            {
              "path": "images/428058fd16582e76.jpg"
            },
            {
              "path": "images/5c05014f96259180.jpg"
            }
          ],
          "title": "Install the Soft Close Damper\n",
          "description": "<br />\n\n* Firmly push the Soft Close Damper (Part A15) into the hole on the Top Cover Panel (Part 5).\n\n"
        },
        {
          "images": [
            {
              "path": "images/a76e4483e6a293f5.jpg"
            },
            {
              "path": "images/450981c5b1951257.jpg"
            }
          ],
          "title": "Install the Door Hinge\n",
          "description": "Note: Ensure that the holes of the hinge that are not being used are facing the front of the door panel.\n\n* Install the Door Hinge (Part A14) onto the end of the Door (Part 7) using Screws (Part G24).\n\n"
        },
        {
          "images": [
            {
              "path": "images/217d9c56233025be.jpg"
            },
            {
              "path": "images/80fac76a97d837db.jpg"
            }
          ],
          "title": "Attach the door panels to the frame\n",
          "description": "Note: Ask someone to hold the door panel in place to ensure no injury or damage occurs.\n\n* Loosely screw the hinges (Part A14) to the Right Side Panel (Part 3) using screw (Part G24).\n\n* Once all screws are in place, tighten them completely.\n\n"
        },
        {
          "images": [
            {
              "path": "images/63a2d1ab3a4c3bf7.jpg"
            },
            {
              "path": "images/510b9249362ed179.jpg"
            }
          ],
          "title": "Install the Handle\n",
          "description": "Note: Ensure you follow the diagram to get the internal handle parts in the correct order.\n\n* Taking care, fix the Handle (Part A19) to the door.\n\n"
        },
        {
          "images": [
            {
              "path": "images/7cb7ca98055d7580.jpg"
            },
            {
              "path": "images/b01161288e21671c.jpg"
            }
          ],
          "title": "Install the Ground Fixings\n",
          "description": "Note: The unit must be securely fixed to the ground to ensure stability. Failure to do so may result in damage or injury.\n\n* Fix the unit to the ground using expansion bolts (Part A13).\n\n"
        },
        {
          "images": [
            {
              "path": "images/febbf79adbc9c26f.jpg"
            },
            {
              "path": "images/9b33724ac73b198e.jpg"
            }
          ],
          "title": "Install the Metal Chain and Ring\n",
          "description": "<br />\n\n* Loop the Metal Chain (A20) through the handles on the wheelie bin. Connect the chain to the Top Cover Panel (Part 5) using the Metal Ring (Part A18).\n\n"
        },
        {
          "images": [
            {
              "path": "images/78124abca09584d5.png"
            },
            {
              "path": "images/693c6274b119ea15.png"
            },
            {
              "path": "images/d9cc3d40cca30d53.png"
            },
            {
              "path": "images/ca1a321225cf76e8.png"
            }
          ],
          "title": "Install the Deodoriser Block Holder\n",
          "description": "* Bend each side inward as indicated by the arrows.\n\n* Line up the holes and secure them with the provided screws (Part K10).\n\n* Cover the screws with the rubber caps (Part L22) for safety.\n\n* Then, attach the deodoriser block holder to the wheelie bin storage using the supplied screws (Part G21).\n\n<br />\n\n"
        },
        {
          "images": [],
          "title": "Maintenance\n",
          "description": "* Clean the unit periodically using mild detergent and water to remove dirt and debris.\n* Inspect and tighten all fixings regularly to maintain structural integrity.\n* Lubricate hinges and locks periodically to ensure smooth operation.\n* Check gas pistons periodically for performance and replace if signs of failure occur.\n* Inspect for signs of corrosion or surface damage and treat promptly to maintain product lifespan.\n"
        },
        {
          "images": [],
          "title": "Troubleshooting\n",
          "description": "**Please read through the guide below if you have any issues or faults with your device. The information covers and resolves the majority of frequently asked questions.**\n\n**Q: There are parts missing from my order.** A: If there appears to be any part missing from your package contact our Customer Support team via the details on the Contact Us page within 7 days of receipt.\n\n**For all other issues please contact our Customer Support department via the details on the Contact page.**\n"
        }
      ],
      "materials": {
        "items": [
          {
            "name": "Part 1 - Bottom Frame",
            "image": {
              "path": "images/a2453f5b91b291cf.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part 2 - Side Panel, Left",
            "image": {
              "path": "images/4360998afc1439e9.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part 3 - Side Panel, Right",
            "image": {
              "path": "images/38414257b70db956.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part 4 - Back Panel",
            "image": {
              "path": "images/d971ccd422349486.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part 5 - Top Cover Panel",
            "image": {
              "path": "images/1320a883a63faf1f.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part 6 - Handle",
            "image": {
              "path": "images/9a494e22dff45fbd.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part 7 - Door",
            "image": {
              "path": "images/7ff2b56c1e3b82b5.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part 9 - Deodoriser Block Holder",
            "image": {
              "path": "images/7b82bfb73b70df96.png",
              "alt": ""
            }
          },
          {
            "name": "Part G24 - Screws",
            "image": {
              "path": "images/db122d44fee07914.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part G25 - Screws",
            "image": {
              "path": "images/db122d44fee07914.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part G26 - Screws",
            "image": {
              "path": "images/a5a935faae7be6a1.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part G27 - Screws",
            "image": {
              "path": "images/a5a935faae7be6a1.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part A13 - Expansion Bolt",
            "image": {
              "path": "images/ba495686eaff7c41.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part A14 - Door Hinge",
            "image": {
              "path": "images/5d3a01750518bb61.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part A15 - Soft Close Damper",
            "image": {
              "path": "images/b7888d489ce41a79.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part A16 - Feet",
            "image": {
              "path": "images/23beb5cf8e6d8b92.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part A17 - Magnet",
            "image": {
              "path": "images/8fb96d45c25cfa37.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part A18 - Metal Ring",
            "image": {
              "path": "images/77020dfa1d20b8c7.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part A19 - Handle & Keys",
            "image": {
              "path": "images/8c7368c37dbe722b.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part A20 - Metal Chain",
            "image": {
              "path": "images/e2a8febde979e61f.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part T10 - Wrench",
            "image": {
              "path": "images/0db3e2cc90435de7.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part G61 - Screws",
            "image": {
              "path": "images/068dfd41f0280107.png",
              "alt": ""
            }
          },
          {
            "name": "Part L22 - Rubber Screw Caps",
            "image": {
              "path": "images/00e3ec7b201f5593.png",
              "alt": ""
            }
          },
          {
            "name": "Part K10 - Screws",
            "image": {
              "path": "images/4e0d3ecac00cae7e.png",
              "alt": ""
            }
          }
        ],
        "title": "Parts"
      },
      "productInfo": {
        "characteristics": [
          {
            "label": "SKU",
            "value": "217875,217877,217879"
          }
        ],
        "variations": [
          {
            "name": "Specifications:",
            "value": "Attribute:"
          },
          {
            "name": "Dimensions:",
            "value": "1162 x 692 x 802 MM"
          },
          {
            "name": "Net Weight:",
            "value": "31.52 KG"
          },
          {
            "name": "Gross Weight:",
            "value": "34.52 KG"
          },
          {
            "name": "Materials:",
            "value": "Galvanised Steel, Epoxy Powder Coating Wooden Pattern"
          },
          {
            "name": "Capacity:",
            "value": "Holds One Standard 240L UK Dustbin"
          }
        ],
        "name": "Metal Wheelie Bin Storage - Single",
        "description": "This metal wheelie bin storage unit is designed to securely house one bin, helping maintain a neat and organised outdoor space. It features lockable doors, piston-assisted soft-close lids, and a chain linkage system for convenient bin access. Available in a durable anthracite metal finish or a wood-effect metal finish, it also includes a built-in holder for deodoriser blocks (not included).\n"
      }
    }
  ],
  "cover": {
    "title": "Metal Wheelie Bin Storage - Single",
    "description": "This guide provides step-by-step instructions for assembling, operating, and maintaining your Metal Wheelie Bin Storage - Single.",
    "image": {
      "path": "images/a2b5b1398a1f582d.png",
      "alt": ""
    }
  }
}