{
  "schema": "stepacross.manual.v1",
  "slug": "q-rax-workbench",
  "lang": "en",
  "title": "Q-Rax Workbench",
  "description": "Tackle any project with this Q-Rax garage workbench—strong, sturdy, and built for serious work. With a 200kg load capacity per shelf, adjustable lower shelf, and easy boltless assembly, it’s perfect f",
  "status": "public",
  "chapters": [
    {
      "infos": [
        {
          "title": "Safe Working Practice",
          "text": "Please read through the safe working practice to ensure prevention of injury or damage to the device.\n\n*   Do not use the Q-Rax Workbench in areas of high temperature or humidity as the MDF boards are untreated and may warp or become uneven.\n*   Do not use corrosive cleaning equipment when cleaning your workbench, as this may erode the paint.\n*   Do not exceed the weight capacities, detailed on the Specification page. **Please Note:** These capacities are based on the weight distributed across the whole workbench.\n*   Always keep the weight evenly distributed to avoid damage to the rack or MDF and to prevent the rack from falling over.\n*   Be careful when using a hammer to assemble.\n*   Ensure that each beam is properly hammered into place before continuing with the assembly process.\n*   Be sure that each MDF board is slotted into the shelf correctly before you begin storage on the racking.\n*   Ensure the moulded feet are attached correctly to prevent any potential injury.\n*   Treat the MDF boards with varnish or mould prevention products if using in a humid environment.",
          "type": "Safety"
        },
        {
          "title": "GPSR Information\n",
          "text": "**UK**\n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n\n",
          "type": "Gpsr"
        }
      ],
      "steps": [
        {
          "number": 1,
          "description": "Group all parts together and lay them on the floor for easy access during assembly.",
          "images": [
            {
              "path": "images/6f0a44a38a44f4b2.jpg",
              "alt": ""
            }
          ],
          "title": "Organize Parts"
        },
        {
          "number": 2,
          "description": "Attach the 4 moulded feet to the ends of the 4 L-shaped upright beams.",
          "images": [],
          "title": "Attach Moulded Feet"
        },
        {
          "number": 3,
          "description": "Before assembling, ensure the beams are oriented correctly. \n\n**Refer to the image for guidance.**\n\nThe short and long beams will slot into place.",
          "images": [
            {
              "path": "images/4bc01a8c10b04d90.jpg",
              "alt": ""
            }
          ],
          "title": "Ensure Correct Beam Orientation"
        },
        {
          "number": 4,
          "description": "*   Take two L-shaped upright beams and attach a short beam across the bottom to connect them, forming a U-shape.\n*   Push the beams into the bar locking system, ensuring they are the right way up, and then hammer into place.\n*   Repeat this process with the other two upright beams.",
          "images": [],
          "title": "Create U-Shapes"
        },
        {
          "number": 5,
          "description": "Connect the two U-shapes together using 2 long beams.",
          "images": [],
          "title": "Connect U-Shapes"
        },
        {
          "number": 6,
          "description": "*   Slot one MDF board into the metal shelf and secure it with a tap of the mallet. This completes the lower shelf.\n\n**Note:** Treat the MDF boards with varnish or mould prevention products to prolong their life.",
          "images": [],
          "title": "Install Lower Shelf"
        },
        {
          "number": 7,
          "description": "*   Repeat the process on either side of the rack, first with two small beams for the sides, then with two long beams for the front and back.\n*   Slot in the MDF board to create the workbench table top.",
          "images": [],
          "title": "Assemble Workbench Table Top"
        },
        {
          "number": 8,
          "description": "*   Your Q-Rax Workbench should now be complete.\n\n**Note:** Evenly distribute the weight of your tools on the workbench.",
          "images": [
            {
              "path": "images/65e101d64ce78b94.jpg",
              "alt": ""
            }
          ],
          "title": "Completion"
        },
        {
          "number": 9,
          "description": "Please read through the guide below if you have any issues or faults with your Q-Rax Workbench.\n\n**Q:** There are parts missing from my order.\n\n**A:** If a part is missing please get in touch with us within 7 days on receipt of your order. You can call or email our friendly and helpful Customer Support Team. Please see details on the Contact Us page.\n\n**Q:** The MDF has begun to warp or change shape.\n\n**A:** Do not use this Q-Rax Workbench for storage in a humid environment as the included MDF is untreated and is therefore susceptible to bend in an extremely damp or warm room. Other MDF can be cut and used by the customer.\n\nIf you would like to reduce the potential of warping, please feel free to personally treat the MDF with a varnish or paint.\n\n**Q:** What kind of tools should I use to assemble the Q-Rax Workbench?\n\n**A:** The only tools required to assemble a Q-Rax Workbench is a rubber mallet - available to buy at Monster Shop.\n\n**Q:** I’m worried the MDF shelves might grow mould in my garage.\n\n**A:** We recommend you treat the MDF with mould prevention products. They are very accessible and cheap from good DIY stores.",
          "images": [],
          "title": "Resolution Guide"
        }
      ],
      "sections": [],
      "materials": {
        "items": [
          {
            "name": "L-Shaped Upright Beams "
          },
          {
            "name": "MDF Boards "
          },
          {
            "name": "Short Beams "
          },
          {
            "name": "Long Beams "
          },
          {
            "name": "Moulded Feet/End Caps "
          }
        ],
        "title": "Materials"
      },
      "tools": {
        "items": [
          {
            "name": "Rubber Mallet "
          }
        ]
      },
      "productInfo": {
        "characteristics": [
          {
            "label": "SKU",
            "value": "7003"
          },
          {
            "label": "Dimensions",
            "value": "120cm W x 60cm D x 90cm H"
          },
          {
            "label": "Capacity",
            "value": "200kg of Evenly Distributed Weight"
          },
          {
            "label": "Materials",
            "value": "1.2mm Steel, 7.6mm MDF"
          },
          {
            "label": "Weight",
            "value": "11.7kg"
          }
        ],
        "variations": [],
        "name": "Q-Rax Workbench",
        "label": "Buy",
        "description": "The Q-Rax Workbench is a perfect storage and working area solution suited towards any man-cave including; garages, warehouses, stock rooms and workshops. \n\nThe workbench frame is made from 1.2mm heavy duty steel and combined with the Q-shaped lock and key mechanism means it is very quick to assemble and can hold a massive 200KG. Finished with two layers of powder coated paint, this durable workbench will maintain its excellent condition for even longer. \n\nThe Q-Rax Workbench is 100% bolt-less, making it easy to assemble and only requiring the use of a rubber mallet."
      }
    }
  ],
  "cover": {
    "title": "Q-Rax Workbench",
    "description": "Tackle any project with this Q-Rax garage workbench—strong, sturdy, and built for serious work. With a 200kg load capacity per shelf, adjustable lower shelf, and easy boltless assembly, it’s perfect for your shed, workshop, or garage. ",
    "image": {
      "path": "images/9a8a0fd682d1c60c.jpg",
      "alt": ""
    }
  }
}