KuKoo Steel Sink and Rainbow Tap

10453/25894

Product Information

Steel Sink and Rainbow Tap

Enhance any kitchen with this stylish and durable stainless steel sink from KuKoo, designed to look pristine even in the busiest environments. Made from high-quality 0.9mm stainless steel, this sink offers both a brilliant finish and sturdy construction, outshining standard sinks in durability and style. With your new sink, you’ll also receive a plug less basket strainer waste kit that works seamlessly for both plug holes—simply push to seal and pull to release water, preventing food debris from clogging your sink. Plus, enjoy a range of extras at no extra cost: a plumbing kit, tap hole cover plate, clips, rubber sealing strips, and the stylish Rainbow mixer tap. Installing this sink is easy—just fit it into a pre-cut hole in your worktop and secure it with the included clips. With an overall size of approximately 1050mm x 500mm, you’ll need a worktop cut-out of 1030mm x 480mm. Pre-punched 35mm tap holes allow for reversible installation, giving you the choice of a left- or right-hand drainer based on your kitchen layout.

SKU: 10453,25894

	10453/25894
Material	0.9mm Stainless Steel
Design	1.5 Bowl with Reversible Drainer
Tap	Rainbow Mixer Tap with Extendable 60cm Reach
Dimensions	1050mm (L) x 500mm (W)
Cut-out Requirement	1030mm (L) x 480mm (W)

Safety Advice

Ensure you have read and fully understood the instruction manual and safety advice before using this product.
Only qualified personnel should install this product to ensure proper connection to plumbing and water supplies and to avoid potential leaks or property damage.
Do not install the sink or tap near electrical outlets or appliances without proper waterproofing measures to prevent electrical hazards.
Confirm that all pipe connections, seals, and washers are properly installed and tightened to prevent leaks that may cause water damage or mould growth.
Ensure the tap is compatible with the water pressure system in your property; excessive pressure may cause tap failure or water bursts.
Avoid using harsh chemicals, abrasive cleaners, or steel wool on the stainless steel sink or rainbow finish tap to prevent surface damage and corrosion.
Check that the sink is fully supported during and after installation; undermount and inset sinks must be mounted according to manufacturer guidelines to avoid detachment or structural failure.
Do not place extremely hot items directly in the sink, as thermal shock can warp or discolour stainless steel surfaces.
Avoid striking the tap or sink with heavy objects; dents or cracks may lead to functional failure or sharp edges causing injury.
Do not overload the sink with excessive weight (e.g. standing in or storing heavy objects inside); this may cause deformation or detachment from worktops.
Keep the area around the sink and tap dry when not in use to avoid slips, water pooling, and mould growth.
Ensure all fittings and flexible hoses are checked for wear, rust, or degradation during regular inspections and replaced as needed.
Do not attempt to disassemble the tap or sink mountings while connected to water supply lines; always isolate the water supply before performing maintenance.
Clean the aerator and filter on the tap regularly to maintain water flow and prevent limescale buildup.
Do not allow children to play with or hang from the tap or edges of the sink.
Periodically inspect all seals, brackets, and mountings for signs of loosening, wear, or corrosion, and take corrective action immediately to maintain safety and functionality.
Ensure proper earthing and bonding is in place if the sink is installed near electrical installations or metal appliances.
In the event of leaks, discontinue use immediately and isolate water supply until a qualified technician can assess the issue.
Use only compatible tools and fittings provided or recommended by the manufacturer during installation and maintenance to avoid damage and voiding of warranty.

1. Maintenance Advice

Clean the stainless steel sink regularly with warm soapy water and a soft cloth to maintain hygiene and prevent the buildup of residue or stains.
Dry the sink after each use with a soft towel or microfibre cloth to prevent water spots and mineral deposits, especially in hard water areas.
Avoid using abrasive pads, wire wool, or scouring powders, which may scratch the stainless steel surface and compromise its corrosion resistance.
Use a non-abrasive, pH-neutral stainless steel cleaner for deeper cleans, ensuring it is rinsed off thoroughly to prevent chemical buildup.
Maintain the rainbow finish tap by wiping it with a damp, soft cloth only; avoid acidic or abrasive cleaners that may degrade the coloured coating.
Do not use bleach or chlorine-based products on the sink or tap, as these may cause discolouration or pitting on stainless steel surfaces.
Descale the tap aerator every 3–6 months by unscrewing it and soaking it in a mild vinegar solution to remove limescale and ensure optimal water flow.
Check and clean the waste trap regularly to prevent blockages, foul odours, and water backup.
Inspect flexible hoses connected to the tap at least twice a year for signs of wear, bulging, or corrosion, and replace them immediately if compromised.
Examine silicone or rubber seals around the tap and sink for degradation or mould growth and replace as needed to maintain a watertight seal.
Test all tap joints and fittings periodically for leaks or drips and tighten connections or replace washers where necessary.
For rainbow taps with moving parts (e.g. pull-out spray heads), lubricate internal components with food-safe silicone grease as advised by the manufacturer.
Avoid leaving metal objects such as pots or cutlery in the sink for extended periods, as these may cause localised rust staining.
Do not allow standing water or wet sponges to remain in contact with the surface, as they can contribute to mineral deposits and surface dulling.
Periodically check the integrity of the mounting hardware beneath the sink to ensure there is no loosening or sagging that could cause detachment.
In areas with hard water, install a water softener or use a tap filter to reduce limescale accumulation and prolong the lifespan of both sink and tap.
Store harsh cleaning chemicals away from the sink cabinet interior to avoid accidental spills or vapour exposure that may corrode pipework or fittings.
Maintain proper ventilation in the kitchen area to reduce humidity and prevent condensation around the tap and sink fixtures.
Keep the instruction manual and product information accessible for future reference regarding compatible replacement parts and manufacturer-approved maintenance methods.

2. Troubleshooting

WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?

If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.

FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.