{
  "schema": "stepacross.manual.v1",
  "slug": "steel-sink-and-rainbow-tap",
  "lang": "en",
  "title": "KuKoo Steel Sink and Rainbow Tap",
  "description": "10453/25894",
  "status": "hidden",
  "chapters": [
    {
      "infos": [
        {
          "title": "Safety Advice ",
          "text": "*   Ensure you have read and fully understood the instruction manual and safety advice before using this product.\n*   Only qualified personnel should install this product to ensure proper connection to plumbing and water supplies and to avoid potential leaks or property damage.\n*   Do not install the sink or tap near electrical outlets or appliances without proper waterproofing measures to prevent electrical hazards.\n*   Confirm that all pipe connections, seals, and washers are properly installed and tightened to prevent leaks that may cause water damage or mould growth.\n*   Ensure the tap is compatible with the water pressure system in your property; excessive pressure may cause tap failure or water bursts.\n*   Avoid using harsh chemicals, abrasive cleaners, or steel wool on the stainless steel sink or rainbow finish tap to prevent surface damage and corrosion.\n*   Check that the sink is fully supported during and after installation; undermount and inset sinks must be mounted according to manufacturer guidelines to avoid detachment or structural failure.\n*   Do not place extremely hot items directly in the sink, as thermal shock can warp or discolour stainless steel surfaces.\n*   Avoid striking the tap or sink with heavy objects; dents or cracks may lead to functional failure or sharp edges causing injury.\n*   Do not overload the sink with excessive weight (e.g. standing in or storing heavy objects inside); this may cause deformation or detachment from worktops.\n*   Keep the area around the sink and tap dry when not in use to avoid slips, water pooling, and mould growth.\n*   Ensure all fittings and flexible hoses are checked for wear, rust, or degradation during regular inspections and replaced as needed.\n*   Do not attempt to disassemble the tap or sink mountings while connected to water supply lines; always isolate the water supply before performing maintenance.\n*   Clean the aerator and filter on the tap regularly to maintain water flow and prevent limescale buildup.\n*   Do not allow children to play with or hang from the tap or edges of the sink.\n*   Periodically inspect all seals, brackets, and mountings for signs of loosening, wear, or corrosion, and take corrective action immediately to maintain safety and functionality.\n*   Ensure proper earthing and bonding is in place if the sink is installed near electrical installations or metal appliances.\n*   In the event of leaks, discontinue use immediately and isolate water supply until a qualified technician can assess the issue.\n*   Use only compatible tools and fittings provided or recommended by the manufacturer during installation and maintenance to avoid damage and voiding of warranty.",
          "type": "Safety"
        }
      ],
      "steps": [
        {
          "number": 1,
          "description": "*   Clean the stainless steel sink regularly with warm soapy water and a soft cloth to maintain hygiene and prevent the buildup of residue or stains.\n*   Dry the sink after each use with a soft towel or microfibre cloth to prevent water spots and mineral deposits, especially in hard water areas.\n*   Avoid using abrasive pads, wire wool, or scouring powders, which may scratch the stainless steel surface and compromise its corrosion resistance.\n*   Use a non-abrasive, pH-neutral stainless steel cleaner for deeper cleans, ensuring it is rinsed off thoroughly to prevent chemical buildup.\n*   Maintain the rainbow finish tap by wiping it with a damp, soft cloth only; avoid acidic or abrasive cleaners that may degrade the coloured coating.\n*   Do not use bleach or chlorine-based products on the sink or tap, as these may cause discolouration or pitting on stainless steel surfaces.\n*   Descale the tap aerator every 3–6 months by unscrewing it and soaking it in a mild vinegar solution to remove limescale and ensure optimal water flow.\n*   Check and clean the waste trap regularly to prevent blockages, foul odours, and water backup.\n*   Inspect flexible hoses connected to the tap at least twice a year for signs of wear, bulging, or corrosion, and replace them immediately if compromised.\n*   Examine silicone or rubber seals around the tap and sink for degradation or mould growth and replace as needed to maintain a watertight seal.\n*   Test all tap joints and fittings periodically for leaks or drips and tighten connections or replace washers where necessary.\n*   For rainbow taps with moving parts (e.g. pull-out spray heads), lubricate internal components with food-safe silicone grease as advised by the manufacturer.\n*   Avoid leaving metal objects such as pots or cutlery in the sink for extended periods, as these may cause localised rust staining.\n*   Do not allow standing water or wet sponges to remain in contact with the surface, as they can contribute to mineral deposits and surface dulling.\n*   Periodically check the integrity of the mounting hardware beneath the sink to ensure there is no loosening or sagging that could cause detachment.\n*   In areas with hard water, install a water softener or use a tap filter to reduce limescale accumulation and prolong the lifespan of both sink and tap.\n*   Store harsh cleaning chemicals away from the sink cabinet interior to avoid accidental spills or vapour exposure that may corrode pipework or fittings.\n*   Maintain proper ventilation in the kitchen area to reduce humidity and prevent condensation around the tap and sink fixtures.\n*   Keep the instruction manual and product information accessible for future reference regarding compatible replacement parts and manufacturer-approved maintenance methods.",
          "images": [],
          "title": "Maintenance Advice "
        },
        {
          "number": 2,
          "description": "**WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?**\n\n*   If there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.\n\n**FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.**",
          "images": [],
          "title": "Troubleshooting"
        }
      ],
      "sections": [],
      "materials": {
        "items": [],
        "title": "Parts"
      },
      "productInfo": {
        "characteristics": [
          {
            "label": "SKU",
            "value": "10453,25894"
          }
        ],
        "variations": [
          {
            "name": " ",
            "value": "10453/25894"
          },
          {
            "name": "Material",
            "value": "0.9mm Stainless Steel"
          },
          {
            "name": "Design ",
            "value": "1.5 Bowl with Reversible Drainer"
          },
          {
            "name": "Tap",
            "value": "Rainbow Mixer Tap with Extendable 60cm Reach"
          },
          {
            "name": "Dimensions",
            "value": "1050mm (L) x 500mm (W)"
          },
          {
            "name": "Cut-out Requirement",
            "value": "1030mm (L) x 480mm (W)"
          }
        ],
        "name": "Steel Sink and Rainbow Tap",
        "description": "Enhance any kitchen with this stylish and durable stainless steel sink from KuKoo, designed to look pristine even in the busiest environments.\n\nMade from high-quality 0.9mm stainless steel, this sink offers both a brilliant finish and sturdy construction, outshining standard sinks in durability and style.\n\nWith your new sink, you’ll also receive a plug less basket strainer waste kit that works seamlessly for both plug holes—simply push to seal and pull to release water, preventing food debris from clogging your sink. Plus, enjoy a range of extras at no extra cost: a plumbing kit, tap hole cover plate, clips, rubber sealing strips, and the stylish Rainbow mixer tap.\n\nInstalling this sink is easy—just fit it into a pre-cut hole in your worktop and secure it with the included clips.\n\nWith an overall size of approximately 1050mm x 500mm, you’ll need a worktop cut-out of 1030mm x 480mm. Pre-punched 35mm tap holes allow for reversible installation, giving you the choice of a left- or right-hand drainer based on your kitchen layout."
      }
    }
  ],
  "cover": {
    "title": "KuKoo Steel Sink and Rainbow Tap",
    "description": "10453/25894",
    "image": {
      "path": "images/9da2286013a65d5a.webp",
      "alt": ""
    }
  }
}