{
"schema": "stepacross.manual.v1",
"slug": "swing-hammock-bed",
"lang": "en",
"title": "Swing Hammock Bed ",
"description": "This guide provides step-by-step instructions for assembling components and using the Swing Hammock Bed.",
"status": "public",
"chapters": [
{
"infos": [
{
"title": "",
"text": "Ensure you have read and fully understood the instruction manual and safety advice before using this product.\n\n \n\n* Only assemble the swing hammock bed according to the official instructions using all provided components; do not modify or replace parts.\n* Install the swing hammock bed only on a flat, level, and stable surface to prevent tipping or instability during use.\n* Ensure that the installation area is free from obstacles, debris, and overhead obstructions, and that there is sufficient clearance around all sides.\n* Verify that all pivot joints, bolts, fasteners, and structural supports are fully tightened before each use.\n* Do not use the swing hammock bed if any parts are missing, loose, damaged, or appear structurally unsound.\n* Keep hands, fingers, feet, and limbs clear of all pivot joints and moving swing supports during use to avoid entrapment or injury.\n* Children must be supervised at all times when using the swing hammock bed. Never leave children unattended on or near the swing.\n* Only allow access to users who are physically capable of using the swing hammock safely and provide additional support for elderly or mobility-impaired users where necessary.\n* Always use handrails or side supports when getting on or off the swing hammock bed.\n* Never stand, jump, or bounce on the swing hammock bed at any time. It is designed for seated or reclining use only.\n* Do not exceed the stated maximum weight capacity (240kg) or number of users for this product. Overloading may result in structural failure or tipping.\n* Ensure the hammock is only converted into bed mode when stationary. Do not swing while it is in bed mode.\n* Do not attempt to move or relocate the swing hammock bed while it is assembled or in use. Disassemble before relocating.\n* Use the product only in calm weather conditions; do not use during high winds, storms, or other adverse weather.\n* Secure or remove the canopy and cushions in windy or stormy conditions to prevent detachment or damage.\n* Do not attach or hang additional objects, accessories, or decorations from the frame, chains, or canopy unless specifically designed and tested for that purpose.\n* Any repairs or replacement parts must be sourced from the original manufacturer or approved suppliers to ensure compatibility and safety compliance.\n* Discontinue use immediately if any creaking, instability, or unusual noises occur during swinging or seating, and inspect all joints and load points before resuming use.\n* Do not use the swing hammock bed under the influence of alcohol, drugs, or medication that may impair judgement or balance.\n* Ensure the swing motion is gentle and controlled. Excessive swinging can lead to instability and increased risk of falling.\n",
"type": "Safety"
},
{
"title": "GPSR Information\n",
"text": "**UK**\n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n",
"type": "Gpsr"
}
],
"steps": [],
"sections": [
{
"images": [
{
"path": "images/65e8e5b4f010b494.png"
}
],
"title": "Assemble Side Frames\n",
"description": "
\n\n* Connect Leg A and Leg B using Leg Connector (E)\n\n- Insert the connector tube into both legs\n\n- Secure using:\n\n * Bolts (Q)\n\n * Washers (W)\n\n * Nuts (U)\n\n- Tighten using the provided tools\n\n"
},
{
"images": [
{
"path": "images/f20f6b8d6e55f340.png"
}
],
"title": "Attach Upper Frame Bars\n",
"description": "* Attach Top Bar Left (C) and Top Bar Right (D) to the side frames\n\n* Align the holes at the top of each leg\n\n* Insert bolts with washers and nuts\n\n* Tighten all connections securely\n\n"
},
{
"images": [
{
"path": "images/217fdaebc92823a0.png"
}
],
"title": "Attach the Cup Holder Tray (O)\n",
"description": "* Position the cup holder tray (O) at the mounting point (P) on the side of the frame.\n\n- Align the holes on the tray with the holes on the frame.\n\n- Insert the bolt (S) through the aligned holes.\n\n- Place the washer (X) (and spacer (Z), if included) onto the bolt.\n\n- Secure with the nut (V) and tighten.\n\n"
},
{
"images": [
{
"path": "images/f10f2535161bc2fe.png"
}
],
"title": "Connect Frame with Cross Bars\n",
"description": "* Position the two side frames upright and parallel to each other.\n\n- Attach the Back Bar (F) between the upper rear ends of the side frames.\n\n * Align the holes on the back bar with the holes on each side frame.\n\n- Attach the Bottom Bar (G) between the lower ends of the side frames.\n\n * Align the holes on the bottom bar with the corresponding holes on each side frame.\n\n- Insert bolts (S) through each set of aligned holes.\n\n- Place washers (X) onto the bolts where required.\n\n- Secure with nuts (V) and hand-tighten.\n\n- Once all parts are aligned evenly, fully tighten all bolts securely.\n\n"
},
{
"images": [
{
"path": "images/43f2886e9bada8ae.png"
}
],
"title": "Attach Armrests & Seat Frame\n",
"description": "
\n\n* Install Armrest Left (I)\n\n* Install Armrest Right (I1)\n\n- Attach them to the frame sides\n\n- Secure using:\n\n * Bolts (T)\n\n * Washers (W/X)\n\n * Nuts (U/Z caps if needed)\n\n"
},
{
"images": [
{
"path": "images/68c64a0678c51b8c.png"
}
],
"title": "Install Hanging Hooks\n",
"description": "* Attach Hanging Hooks (H) to the top bar ends\n\n* Ensure springs/hooks are secure\n\n* These will support the hammock seat\n\n"
},
{
"images": [
{
"path": "images/8ffbeac4f31ca102.png"
}
],
"title": "Install Canopy Frame\n",
"description": "* Attach Canopy Curved Bars (K) to the frame\n\n* Secure using bolts (Y)\n\n* Ensure both sides are aligned and symmetrical\n\n"
},
{
"images": [
{
"path": "images/70dd0f776597861d.png"
}
],
"title": "Attach Canopy Support & Fabric\n",
"description": "* Insert Canopy Straight Bars (L) into the canopy fabric (M)\n\n* Attach the canopy assembly onto the curved bars\n\n* Ensure the fabric is evenly stretched and properly aligned\n\n"
},
{
"images": [
{
"path": "images/3be8a1cc477a875e.png"
}
],
"title": "Install Hammock Bed (Seat)\n",
"description": "
\n\n* Hang Hammock Bed (J) onto the hooks\n\n- Ensure both sides are evenly attached\n\n- Check that the seat swings freely\n\n"
},
{
"images": [
{
"path": "images/a929949cb4cdab4e.png"
}
],
"title": "Install Seat Cushion\n",
"description": "* Place Seat Cushion (N) onto the hammock bed\n\n- Ensure the the seat cushion is central and secure\n\n"
},
{
"images": [
{
"path": "images/283f52f99af8fc0d.png"
}
],
"title": "Secure Side Connections and Tray\n",
"description": "* Ensure all bolts are securely tightened\n\n* Check that all components are properly assembled and secure\n\n"
},
{
"images": [],
"title": "Maintenance\n",
"description": "
\n\n* Regularly inspect the frame, chains, swing arms, and hammock fabric for any signs of damage, rust, fraying, or wear, and cease use immediately if any issues are found.\n* Store cushions and any fabric accessories indoors when not in use or during prolonged periods of bad weather to preserve their condition and prevent injury from loose items.\n* Clean metal parts using a mild soapy solution and a soft cloth. Rinse thoroughly and dry fully to prevent rust and corrosion. Do not use abrasive cleaners or metal brushes.\n* Machine wash or spot-clean cushions as per the manufacturer’s instructions. Allow to dry completely before returning to outdoor use.\n* Do not use high-pressure washers on any part of the swing hammock bed as this may damage protective coatings or fabrics.\n\n"
},
{
"images": [],
"description": "* Please read through the guide below if you have any issues or faults with your device. The information covers and resolves the majority of frequently asked questions.\n* Q: There are parts missing from my order. A: If there appears to be any part missing from your package contact our Customer Support team via the details on the Contact Us page within 7 days of receipt.\n* For all other issues please contact our Customer Support department via the details on the Contact page**.**\n"
}
],
"materials": {
"items": [
{
"name": "Leg (Part A)",
"image": {
"path": "images/53d5e1136b97df57.png",
"alt": ""
}
},
{
"name": "Leg (Part B)",
"image": {
"path": "images/ad32dd7d5baaed23.png",
"alt": ""
}
},
{
"name": "Top Bar Left(Part C)",
"image": {
"path": "images/06dfaa1f512321ce.png",
"alt": ""
}
},
{
"name": "Top Bar Right (Part D)",
"image": {
"path": "images/8083d9ab4cb8f6a5.png",
"alt": ""
}
},
{
"name": "Leg Connector (Part E)",
"image": {
"path": "images/ff4f597d1ceb522f.png",
"alt": ""
}
},
{
"name": "Back Bar (Part F)",
"image": {
"path": "images/8f04b3eab2b7bf12.png",
"alt": ""
}
},
{
"name": "Bottom Bar (Part G)",
"image": {
"path": "images/14a374fe22690b43.png",
"alt": ""
}
},
{
"name": "Hanging Hook (Part H)",
"image": {
"path": "images/0a4c64381ecbf6cc.png",
"alt": ""
}
},
{
"name": "Armrest Left (Part I)",
"image": {
"path": "images/dace5389a3036409.png",
"alt": ""
}
},
{
"name": "Armrest Right (Part I1)",
"image": {
"path": "images/a9cee11484e16ee7.png",
"alt": ""
}
},
{
"name": "Hammock Bed (Part J)",
"image": {
"path": "images/9ada1ac1f2fab1a3.png",
"alt": ""
}
},
{
"name": "Canopy Curved Bar (Part K)",
"image": {
"path": "images/fb60628b4998c412.png",
"alt": ""
}
},
{
"name": "Canopy Straight Bar (Part L)",
"image": {
"path": "images/050640f2ad270307.png",
"alt": ""
}
},
{
"name": "Canopy Fabric (Part M)",
"image": {
"path": "images/e4a6986f34231923.png",
"alt": ""
}
},
{
"name": "Seat Cushion (Part N)",
"image": {
"path": "images/0d283564ba058287.png",
"alt": ""
}
},
{
"name": "Cup Holder Left (Part O)",
"image": {
"path": "images/b56561d2b81849c0.png",
"alt": ""
}
},
{
"name": "Cup Holder Right (Part P)",
"image": {
"path": "images/c11313ca46e37f40.png",
"alt": ""
}
},
{
"name": "Bolt - Short (Part Q)",
"image": {
"path": "images/4d91e50e264aff5f.png",
"alt": ""
}
},
{
"name": "Bolt - Medium (Part S)",
"image": {
"path": "images/6a5a76e6e476af98.png",
"alt": ""
}
},
{
"name": "Bolt - Long (Part T)",
"image": {
"path": "images/6293a6bec327f777.png",
"alt": ""
}
},
{
"name": "Nut (Part-U)",
"image": {
"path": "images/aaaff0c6891de454.png",
"alt": ""
}
},
{
"name": "Cap Nut (Part V)",
"image": {
"path": "images/36d54b9a9c2ad637.png",
"alt": ""
}
},
{
"name": "Washer - large (Part W)",
"image": {
"path": "images/2e50cef3b92048da.png",
"alt": ""
}
},
{
"name": "Washer - Small (Part X)",
"image": {
"path": "images/f5ecf82e221c7dfb.png",
"alt": ""
}
},
{
"name": "Screw (Part Y)",
"image": {
"path": "images/064f9d89077ee9a1.png",
"alt": ""
}
},
{
"name": "Bolt Cover (Part Z)",
"image": {
"path": "images/59f955216a893bae.png",
"alt": ""
}
},
{
"name": "Allen Key (Part AA)",
"image": {
"path": "images/594b3305011a1214.png",
"alt": ""
}
},
{
"name": "Spanner (Part BB)",
"image": {
"path": "images/f3725a87ed394779.png",
"alt": ""
}
}
],
"title": "Parts"
},
"productInfo": {
"characteristics": [
{
"label": "SKU",
"value": "216635"
},
{
"label": "Weight",
"value": "Net Weight 35kg / Gross Weight 40kg"
},
{
"label": "Dimensions",
"value": "200 (W) x 125 (D) x 170 (H) cm"
}
],
"variations": [
{
"name": "Materials",
"value": " "
},
{
"name": "Rain Cover ",
"value": "600D Oxford "
},
{
"name": "Frame ",
"value": "Steel "
},
{
"name": "Cup Holder ",
"value": "Polypropylene"
},
{
"name": "Canopy ",
"value": "180g Polyester "
},
{
"name": "Cushion Fabric ",
"value": "220g Polyester "
},
{
"name": "Underlying Cushion Fabric",
"value": "Polyethylene coated 600D Oxford fabric"
}
],
"name": "Swing Hammock Bed",
"description": "Introducing the Swing Hammock Bed. This stylish and comfortable outdoor lounger features a strong powder-coated steel frame, a fixed overhead canopy, and durable weather-resistant fabric—perfect for relaxing in either seated or fully reclined bed mode. With a smooth swinging motion, generously cushioned support, and built-in shade, the Swing Hammock Bed brings both elegance and ease to your garden retreat.\n"
}
}
],
"cover": {
"title": "Swing Hammock Bed ",
"description": "This guide provides step-by-step instructions for assembling components and using the Swing Hammock Bed.",
"image": {
"path": "images/461f899e7518f192.png",
"alt": ""
}
}
}