{
  "schema": "stepacross.manual.v1",
  "slug": "t-mech-10-ton-bench-mounted-hydraulic-shop-press-gauge",
  "lang": "en",
  "title": "T-Mech 10 Ton Bench Mounted Hydraulic Shop Press Gauge",
  "description": "This guide provides step-by-step instructions for assembling components and using the T-Mech 10 Ton Bench Mounted Hydraulic Shop Press Gauge. ",
  "status": "public",
  "chapters": [
    {
      "infos": [
        {
          "title": "Safety Advice\n",
          "text": "* This press is designed and intended for use by properly trained and experienced personnel only.\n\n* If you are not familiar with the proper and safe operation of a hydraulic press, do not use until proper training and knowledge has been obtained.\n\n* DO NOT operate this press beyond it's rated capacity.\n\n* DO NOT compress springs or other objects that could be ejected from the press.\n\n* DO NOT compress objects that could shatter.\n\n* Check the press for loose or damaged parts before each operation.\n\n* Replace damaged parts and tighten all loose bolts before operating.\n\n* Some parts being pressed may tend to pop out of the press or explode under pressure.\n\n* Please wear the correct PPE for operating this machine.\n\n",
          "type": "Safety"
        },
        {
          "title": "GPSR Information\n",
          "text": "**UK**\n\n \n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n",
          "type": "Gpsr"
        }
      ],
      "steps": [],
      "sections": [
        {
          "images": [
            {
              "path": "images/fee844e2f4d66a68.jpg"
            }
          ],
          "title": "Assembly Diagram\n",
          "description": "-Please see the attached image for assembly instructions.\n"
        },
        {
          "images": [],
          "title": "Operating Instructions\n",
          "description": "* Place work piece on bed frame.\n\n* Locate and close release valve.\n\n* Pump handle until the ram nears work piece.\n\n* Apply load to work piece by pumping handle. Do not overload work piece.\n\n* Remove load from work piece by turning release valve.\n\n* Stabilise work piece so it does not fall while pressure is released.\n\n* Remove work piece after ram is fully retracted.\n\n"
        },
        {
          "images": [],
          "title": "Maintenance\n",
          "description": "* Periodically, lightly oil all moving parts including the pump piston and hydraulic ram.\n* Check hydraulic connections and hoses before each use.\n* DO NOT use if cut, damaged, leaking or other damaged connections and/or hoses are noted.\n\n"
        },
        {
          "images": [],
          "title": "Troubleshooting\n",
          "description": "**Please read through the guide below if you have any issues or faults with your device. The information covers and resolves the majority of frequently asked questions.**\n\n**Q: There are parts missing from my order.** A: If there appears to be any part missing from your package contact our Customer Support team via the details on the Contact Us page within 7 days of receipt.\n\n**Please note there is no part 5 in this model. No parts are missing.**\n\n**For all other issues please contact our Customer Support department via the details on the Contact page.**\n\n<br />\n\n"
        }
      ],
      "materials": {
        "items": [
          {
            "name": "Part 1 - Pressure Gauge",
            "image": {
              "path": "images/fee844e2f4d66a68.jpg",
              "alt": ""
            }
          },
          {
            "name": "Part 2 - Nylon Ring"
          },
          {
            "name": "Part 3 - Ram"
          },
          {
            "name": "Part 4 - Hydraulic Hose"
          },
          {
            "name": "Part 6 - Hand Pump"
          },
          {
            "name": "Part 7 - Bolt M10x25"
          },
          {
            "name": "Part 8 - Angle Steel"
          },
          {
            "name": "Part 9 - Rod"
          },
          {
            "name": "Part 10 - Washer"
          },
          {
            "name": "Part 11 - Nut M10"
          },
          {
            "name": "Part 12 - Pad Plate"
          },
          {
            "name": "Part 13 - Press Plate Form"
          },
          {
            "name": "Part 14 - Under Round Nut"
          },
          {
            "name": "Part 15 - Plate"
          },
          {
            "name": "Part 16 - Up Round Nut"
          },
          {
            "name": "Part 17 - Frame"
          },
          {
            "name": "Part 18 - Washer"
          },
          {
            "name": "Part 19 - Bolt M8x15"
          },
          {
            "name": "Part 20 - Plate"
          },
          {
            "name": "Part 21 - Bolt M10"
          }
        ],
        "title": "Parts"
      },
      "productInfo": {
        "characteristics": [
          {
            "label": "SKU",
            "value": "210913"
          }
        ],
        "variations": [
          {
            "name": "Capacity:",
            "value": "10 Ton"
          },
          {
            "name": "Work Area:",
            "value": "0-305mm"
          },
          {
            "name": "RAM Travel:",
            "value": "250mm"
          },
          {
            "name": "Net Weight:",
            "value": "52.80kg"
          }
        ],
        "name": "T-MECH 10 Ton Bench Mounted Hydraulic Shop Press",
        "description": "The T-MECH 10 Ton Bench Mounted Hydraulic Shop Press is a heavy-duty professional workshop tool designed for precision pressing, bearing installation, and metal forming tasks. Constructed from thick, heavy-duty steel and featuring three adjustable working heights, it provides strength, stability, and versatility for demanding applications. An integrated analogue pressure gauge ensures accurate force monitoring, while the bench-bolted design and removable press plates offer secure and adaptable operation.\n"
      }
    }
  ],
  "cover": {
    "title": "T-Mech 10 Ton Bench Mounted Hydraulic Shop Press Gauge",
    "description": "This guide provides step-by-step instructions for assembling components and using the T-Mech 10 Ton Bench Mounted Hydraulic Shop Press Gauge. ",
    "image": {
      "path": "images/8a9956cba526f923.jpg",
      "alt": ""
    }
  }
}