{ "schema": "stepacross.manual.v1", "slug": "wall-mounted-cable-pulley-machine", "lang": "en", "title": "Wall Mounted Cable Pulley Machine", "description": "215523", "status": "public", "chapters": [ { "infos": [ { "title": "Safety Advice ", "text": "**Ensure you have read and fully understood the instruction manual and safety advice before using this product.**\n\n* Ensure the unit is securely mounted with appropriate wall anchors for the surface type. Consult a professional if unsure about wall strength and fixing suitability.\n* Perform periodic inspections of wall fixings and bolts to ensure stability. Tighten or replace any loose or damaged components immediately.\n* Inspect cables regularly for signs of wear or damage. Replace cables immediately if any wear is detected.\n* Do not add extra weight to the machine as this may cause cable failure or structural damage.\n* Use caution when adjusting weights and pulleys by keeping hands clear of moving parts and pinch points to prevent injury.\n* Keep the workout area clear of obstacles to prevent tripping or falling. Store attachments properly when not in use.\n* Use locking mechanisms to secure weight plates in place. Never operate the machine if weights are not properly secured.\n* Ensure all provided attachments are securely fastened before use.\n* Periodically check all fastenings, including bolts and pulleys, for wear or loosening. Replace or tighten components as necessary.\n* If any part of the machine becomes damaged or defective, discontinue use immediately and contact the manufacturer for repairs or replacement.\n* Do not modify or alter any part of the machine, as this may compromise safety and void the warranty.\n* Only use this equipment for its intended purpose. Misuse can result in serious injury or damage.\n* Ensure the machine is used in a well-lit environment with sufficient space around it for safe operation.\n* Keep children and pets away from the machine when in use. Never allow unsupervised access to the equipment.\n* Always maintain correct posture and technique when exercising.\n* Perform an adequate warm-up and stretching routine before use to reduce the risk of muscle or joint injuries.\n* If you experience any pain, dizziness, or discomfort while using the machine, stop exercising immediately and seek medical advice if necessary.\n* Clean and maintain the machine regularly as per the manufacturer’s guidelines to ensure long-term safety and performance.", "type": "Safety" }, { "title": "GPSR Information\n", "text": "**UK**\n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n\n", "type": "Gpsr" } ], "steps": [ { "number": 1, "description": "To assemble the base and support structure of the Wall Mounted Cable Pulley Machine, follow these steps:\n\n1. Attach the **Feet (Part A1)** to the **Feet Connector (Part A2)** using the **M10X20 Bolt (Part C4)**, **M10 Nut (Part C8)**, and **M10 Washer (Part C9)**. Ensure all bolts are securely tightened.\n2. Connect the **Wall Mounting Pole (Part A4)** to the **Feet Connector (Part A2)** using the **M10X65 Bolt (Part C3)**, **M10 Nut (Part C8)**, and **M10 Washer (Part C9)**. Tighten the bolts to ensure stability.\n3. Secure the **Weight Poles (Part A7)** to the **Feet Pole Connectors (Part B6)** using the **M10X70 Bolt (Part C2)**, **M10 Nut (Part C8)**, and **M10 Washer (Part C9)**. Make sure the poles are aligned and firmly attached.\n\nEnsure all components are properly aligned and securely fastened to maintain the stability and safety of the machine.", "images": [ { "path": "images/e354335bf91e0e69.jpg" } ], "title": "Assembly of Wall Mounted Cable Pulley Base" }, { "number": 2, "description": "To continue assembling the Wall Mounted Cable Pulley Machine, follow these steps:\n\n1. Attach the **Weight Pole Bracket (Part A6)** to the top of the **Weight Poles (Part A7)** using two **M10X20 Bolts (Part C4)** and two **M10 Washers (Part C9)**. Ensure the bolts are securely tightened.\n2. Install the **Rope Pulley (Part A8)** onto the **Weight Pole Bracket (Part A6)**.\n3. Place the **Top Weight (Part B10)** onto the **Pole (Part A9)** and align it with the **Weight Plates (Part C1)**.\n4. Insert the **Weight Pin (Part B5)** into the desired weight plate to select the appropriate resistance level.\n\nEnsure all components are properly aligned and securely fastened to maintain the stability and safety of the machine.", "images": [ { "path": "images/e527056f9dc5b432.jpg" } ], "title": "Assembly of Cable Pulley System" }, { "number": 3, "description": "To continue assembling the Wall Mounted Cable Pulley Machine, follow these steps:\n\n1. Attach the **Machine Top (Part A5)** to the **Wall Mounting Pole (Part A4)** using the **M10X65 Bolt (Part C3)**, **M10 Nut (Part C8)**, and **M10 Washer (Part C9)**. Ensure all bolts are securely tightened.\n2. Secure the **Pulley Housing with Two Pulleys (Part B1)** to the **Pole (Part A9)** using the **M10X85 Bolt (Part C7)**, **M10 Nut (Part C8)**, and **M10 Washer (Part C9)**. Tighten the bolts to ensure stability.\n3. Attach the **Pulley Connector (Part A10)** to the **Pole (Part A9)** using the **M10X85 Bolt (Part C7)**, **M10 Nut (Part C8)**, and **M10 Washer (Part C9)**. Make sure the connector is aligned and firmly attached.\n4. Insert the **Screw Knob (Part B9)** into the **Pole (Part A9)** to secure the assembly.\n\nEnsure all components are properly aligned and securely fastened to maintain the stability and safety of the machine.", "images": [ { "path": "images/888b14955dfb2b3a.jpg" } ], "title": "Wall Mounted Cable Pulley Machine Assembly" }, { "number": 4, "description": "To finalise the assembly of the Wall Mounted Cable Pulley Machine, follow these steps:\n\n1. Attach the **Large Pulley (Part B3)** to the **Machine Top (Part A5)** using the **M10X90 Bolt (Part C5)**, **M10 Nut (Part C8)**, and **M10 Washer (Part C9)**. Ensure the bolt is securely tightened.\n2. Secure the **Small Pulley (Part B4)** to the lower section using the **M10X90 Bolt (Part C5)**, **M10 Nut (Part C8)**, and **M10 Washer (Part C9)**. Tighten the bolt to ensure stability.\n3. Connect the **Carabiner (Part B7)** to the cable and attach the **Handle (Part B8)** to the carabiner. Ensure the carabiner is securely fastened.\n\nEnsure all components are properly aligned and securely fastened to maintain the stability and safety of the machine.", "images": [ { "path": "images/62384b03dc1091b1.jpg" } ], "title": "Assembly of Cable Pulley Machine" }, { "number": 5, "description": "* Use a soft, damp cloth with mild detergent to wipe down all metal surfaces, including the frame, pulleys, and weight stack. Avoid abrasive cleaners that may damage the finish.\n* Clean rubber and plastic components, such as grips and cable coatings, with a damp cloth and mild soap. Ensure they are thoroughly dried to prevent deterioration.\n* Wipe down cables regularly to remove dust, sweat, and debris. Avoid using excessive water to prevent moisture damage.\n* Lubricate pulleys and moving parts with a silicone-based lubricant as recommended by the manufacturer to maintain smooth operation. Do not use oil-based lubricants, as they may attract dirt.\n* Inspect and clean weight pins and locking mechanisms to ensure they are free from dust and debris, allowing them to function correctly.\n* Regularly check and wipe down the wall-mounted areas to prevent dust buildup that could affect the stability of the fixings.\n* Store attachments in a clean, dry area when not in use and wipe them down periodically to maintain hygiene and longevity.\n* Never use harsh chemicals, bleach, or solvent-based cleaners, as they may damage coatings, rubber parts, or metal surfaces.\n* Regularly inspect all cables, pulleys, and attachments for signs of wear, fraying, or damage. Replace any worn or damaged components immediately.\n* Check wall fixings and bolts periodically to ensure the machine remains securely mounted. Tighten any loose bolts as necessary.", "images": [], "title": "Maintenance" }, { "number": 6, "description": "* **WHAT DO I DO IF THERE ARE MISSING PARTS FROM MY ORDER?**\n\nIf there appears to be any part missing from your order, contact our friendly and helpful Customer Support Team within 7 days of receipt.\n\n* **FOR ALL OTHER ISSUES, PLEASE CONTACT OUR CUSTOMER SUPPORT TEAM.**", "images": [], "title": "Troubleshooting" } ], "sections": [], "materials": { "items": [ { "name": "Part A1 - Feet", "image": { "path": "images/ec70266abdb6bfa6.jpg", "alt": "" } }, { "name": "Part A2 - Feet Connector", "image": { "path": "images/9b1251212292560f.jpg", "alt": "" } }, { "name": "Part A3 ", "image": { "path": "images/9cee6c4ab193c8bc.jpg", "alt": "" } }, { "name": "Part A4 - Wall Mounting Pole", "image": { "path": "images/119d6ad3e97df83a.jpg", "alt": "" } }, { "name": "Part A5 - Machine Top", "image": { "path": "images/241808ffab043924.jpg", "alt": "" } }, { "name": "Part A6 - Weight Pole Bracket ", "image": { "path": "images/ff459e10cd3a991d.jpg", "alt": "" } }, { "name": "Part A7 - Weight Poles", "image": { "path": "images/68493150931b5a86.jpg", "alt": "" } }, { "name": "Part A8 - Rope Pulley", "image": { "path": "images/9251a6eac85536e8.jpg", "alt": "" } }, { "name": "Part A9 - Pole", "image": { "path": "images/5799a3ad8e6fb9ee.jpg", "alt": "" } }, { "name": "Part A10 - Pulley Connector", "image": { "path": "images/02bfc615294bc27a.jpg", "alt": "" } }, { "name": "Part B1 - Pulley Housing with Two Pulleys", "image": { "path": "images/3762cd51fcb79d63.jpg", "alt": "" } }, { "name": "B2", "image": { "path": "images/63cca3d7d4158d77.jpg", "alt": "" } }, { "name": "Part B3 - Large Pulley", "image": { "path": "images/3fee5f1692ec8df0.jpg", "alt": "" } }, { "name": "Part B4 - Small Pulley", "image": { "path": "images/551137fc297818a0.jpg", "alt": "" } }, { "name": "Part B5 - Weight Pin", "image": { "path": "images/38042faa6c87c264.jpg", "alt": "" } }, { "name": "Part B6 - Feet Pole Connectors", "image": { "path": "images/635b9bbcea708fb6.jpg", "alt": "" } }, { "name": "Part B7 - Carabiner ", "image": { "path": "images/de539b1dadf5e4e4.jpg", "alt": "" } }, { "name": "Part B8 - Handle ", "image": { "path": "images/a3176b8cd2bc27a0.jpg", "alt": "" } }, { "name": "Part B9 - Screw Knob", "image": { "path": "images/1209c568216a09b3.jpg", "alt": "" } }, { "name": "Part B10 - Top Weight", "image": { "path": "images/48f8f98c8d1ff68f.jpg", "alt": "" } }, { "name": "Part C1 - Weight Plate", "image": { "path": "images/28b6f58e929777ff.jpg", "alt": "" } }, { "name": "Part C2 - M10x70 Bolt", "image": { "path": "images/3132670121c226b5.jpg", "alt": "" } }, { "name": "Part C3 - M10x65 Bolt", "image": { "path": "images/7f7767c64ed2d9c2.jpg", "alt": "" } }, { "name": "Part C4 - M10x20 Bolt", "image": { "path": "images/650e4a89334c5611.jpg", "alt": "" } }, { "name": "Part C5 - M10x90 Bolt", "image": { "path": "images/1b240bcf92357565.jpg", "alt": "" } }, { "name": "Part C6 - M10x120 Bolt", "image": { "path": "images/8aec491be92d043c.jpg", "alt": "" } }, { "name": "Part C7 - M10x85 Bolt ", "image": { "path": "images/d948dd88cabee440.jpg", "alt": "" } }, { "name": "Part C8 - M10 Nut", "image": { "path": "images/f5e078ac01c2910d.jpg", "alt": "" } }, { "name": "Part C9 - M10 Washer", "image": { "path": "images/89e5c164455eb4e4.jpg", "alt": "" } }, { "name": "C10", "image": { "path": "images/22914015016ec773.jpg", "alt": "" } }, { "name": "Part D1 - Lat Pulldown Bar ", "image": { "path": "images/90613f190a68148e.jpg", "alt": "" } }, { "name": "Part D2 - Bicep Bar ", "image": { "path": "images/603ff5edbf7011ca.jpg", "alt": "" } }, { "name": "Part D3 - Tricep Rope ", "image": { "path": "images/d61e5e0eda12b62c.jpg", "alt": "" } }, { "name": "Part D4 - Ankle Stap", "image": { "path": "images/cb64d33284686a1f.jpg", "alt": "" } } ], "title": "Parts" }, "productInfo": { "characteristics": [ { "label": "SKU", "value": "215523" } ], "variations": [ { "name": " ", "value": "215523" }, { "name": "Dimensions", "value": "75x62x213cm" }, { "name": "Gross Weight", "value": "113KG" }, { "name": "Material", "value": "Steel, Nylon, Iron, Cement, Rubber Clad Steel Wire, Polyester, Rubber, Polypropylene" } ], "name": "Wall Mounted Cable Pulley Machine", "description": "Introducing the Wall Mounted Cable Pulley Machine – a compact yet powerful solution for full-body strength training. Featuring an 80kg weight stack and a variety of premium attachments including D-handles, lat pulldown bar, bicep bar, tricep rope, and ankle strap, this machine is designed to support a wide range of exercises from upper body pulls to lower body kick-outs. Built with a sturdy steel frame and supplied with all necessary wall fittings and fixtures, it delivers gym-quality performance while maximising space and convenience in your home or studio setup." } } ], "cover": { "title": "Wall Mounted Cable Pulley Machine", "description": "215523", "image": { "path": "images/7948c8ef9653813b.jpg", "alt": "" } } }