{
  "schema": "stepacross.manual.v1",
  "slug": "water-feature-cascade-springs",
  "lang": "en",
  "title": "Water Feature - Cascade Springs ",
  "description": "This guide provides step-by-step instructions for assembling, operating, and maintaining your Monster Shop Water Feature.",
  "status": "public",
  "chapters": [
    {
      "infos": [
        {
          "title": "Safety\n",
          "text": "1. Read all instructions and safety guidelines thoroughly. Failure to follow guideline and instructions could result in serious injury and/or property damage.\n2. Do not pump flammable liquids such as gasoline or fuel oil with the fountain pump.\n3. Make sure the water tube is properly connected with the pump and the upper layer, and the tube is not crimpled. This could cause a blockage, and water will not come out.\n4. During operation, the area around the pump will be covered with water. Take care when handling the pump; do not pull it out of the water (when running) by the power cord, and do not move the product while in operation.\n5. Unplug the pump from the electric power before servicing, cleaning or moving.\n\n",
          "type": "Safety"
        },
        {
          "title": "Cleaning and Maintenance",
          "text": "1. If, after time, the pump starts to lose power or stops working, you should check for the build up of sediment or scale at the bottom of the pump housing, or in the reservoir.\n2. Remove the blockage or any dirt and scale which may have built up and close the case back up.\n3. Periodically change the water and keep water clean. We recommend distilled water to prevent mineral build up. This will improve the waterfall effect.\n\n",
          "type": "Optimisation"
        },
        {
          "title": "GPSR Information\n",
          "text": "**UK**\n\n* **Manufacturer:** Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England.\n* **Person Responsible:** Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880\n\n**EU**\n\n* **Manufacturer:** Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands.\n* **Person Responsible:** Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880\n\n",
          "type": "Gpsr"
        }
      ],
      "steps": [
        {
          "number": 1,
          "description": "1\\. Remove plastic bag from packaging. Read this instruction sheet before proceeding.\n",
          "images": [],
          "title": "Step 1"
        },
        {
          "number": 2,
          "description": "2\\. Place base on a flat surface, and insert reservoir onto base.\n",
          "images": [],
          "title": "Step 2"
        },
        {
          "number": 3,
          "description": "3\\. Read pump user manual. Insert the water pump into water tube.\n",
          "images": [],
          "title": "Step 3"
        },
        {
          "number": 4,
          "description": "4\\. Insert fountain top on reservoir and put pump into water.  Water should be higher than the pump.\n",
          "images": [],
          "title": "Step 4"
        },
        {
          "number": 5,
          "description": "5\\. Make sure the water tube is properly connected with the pump, and is not crimpled.\n",
          "images": [],
          "title": "Step 5"
        },
        {
          "number": 6,
          "description": "6\\. The concave edge of the fountain top should adhere to the convex part of the reservoir. Be sure that the electric wire is passed through the wire opening.\n",
          "images": [],
          "title": "Step 6"
        },
        {
          "number": 7,
          "description": "7\\. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.\n",
          "images": [],
          "title": "Step 7"
        },
        {
          "number": 8,
          "description": "8\\. Please do not use the electrical plug in wet weather conditions.\n",
          "images": [],
          "title": "Step 8"
        },
        {
          "number": 9,
          "description": "9\\. Please do not use in adverse weather conditions.\n",
          "images": [],
          "title": "Step 9"
        },
        {
          "number": 10,
          "description": "Please note: On first use, there may be air in the pump. It may take several minutes until all the air escapes.\n",
          "images": [],
          "title": "Please Note"
        }
      ],
      "sections": [],
      "materials": {
        "items": [
          {
            "name": "Fountain"
          },
          {
            "name": "Reservoir "
          },
          {
            "name": "Pump"
          },
          {
            "name": "Cleaning Brush"
          }
        ],
        "title": "Parts"
      },
      "productInfo": {
        "characteristics": [
          {
            "label": "SKU",
            "value": "216381"
          },
          {
            "label": "Dimensions",
            "value": "31 x 31 x 75.5cm"
          },
          {
            "label": "Materials",
            "value": "Resin"
          },
          {
            "label": "Weight",
            "value": "11.95kg"
          },
          {
            "label": "Power",
            "value": "6.6w"
          }
        ],
        "variations": [],
        "name": "Water Feature - Cascade Springs",
        "description": "\\\nWater Features bring a serene, cascading water display to your garden or patio. Its design creates a calming flow of water perfect for enhancing the tranquil atmosphere of any outdoor space, ideal for adding a touch of elegance and relaxation to your surroundings\n"
      }
    }
  ],
  "cover": {
    "title": "Water Feature - Cascade Springs ",
    "description": "This guide provides step-by-step instructions for assembling, operating, and maintaining your Monster Shop Water Feature.",
    "image": {
      "path": "images/b020eb80f637f8b8.png",
      "alt": ""
    }
  }
}