monstershop.co.uk
Instructions by monstershopWater Feature - Radiant Falls
Water Feature - Radiant Falls Water Feature - Radiant Falls Before you start Note GPSR Information Steps 1. Step 1 2. Step 2 3. Step 3 4. Step 4 5. Step 5 6. Step 6 7. Step 7 8. Step 8 9. Step 9 10. Please Note No results monstershop / Water Feature - Radiant Falls Instructions by monstershop Water Feature - Radiant Falls This guide provides step-by-step instructions for assembling, operating, and maintaining your Monster Shop Water Feature. Product Information Water Feature - Radiant Falls Water Features bring a serene, cascading water display to your garden or patio. Its design creates a calming flow of water perfect for enhancing the tranquil atmosphere of any outdoor space, ideal for adding a touch of elegance and relaxation to your surroundings. Dimensions 31 (L) x 31 (W) x 71.5 (H) cm Weight 6.75kg Power 6.7W SKU 216380 Plug Included: UK & EU IP Rating: IP44 Cable Length: 7m Input: 230-240V-50Hz Output: AC 12V • Ensure the product is installed on a flat, stable surface to prevent tipping or imbalance, especially when filled with water. Uneven ground can lead to instability and potential accidents. • Follow the assembly instructions carefully. Improper assembly can cause leaks, instability, or structural failure, which may lead to injury or damage. • If the water feature is made from polyresin, avoid exposing it to direct sunlight for extended periods as UV light may cause material degradation or discolouration over time. For cement models, avoid harsh impacts, as cement can crack or chip. • Always use the recommended type of water pump. Using an incompatible or incorrect pump could lead to electrical hazards, mechanical failure, or damage to the water feature. • Place the water feature near a ground-fault circuit interrupter (GFCI) outlet for electrical safety, and regularly test the GFCI to ensure it is functioning properly. • Ensure that all electrical cords are routed away from walkways and are properly secured to avoid tripping hazards. Do not allow electrical components to sit in water or become submerged unless specified as waterproof. • Avoid overfilling the water feature to prevent splashing or water damage to surrounding areas. Follow the recommended water level in the product manual to avoid pump damage or malfunction. • Regularly inspect the water feature for any cracks, chips, or damage. Repair or replace any damaged components immediately to avoid further damage or injury. • Keep the water clean by following regular maintenance and water treatment guidelines. Dirty water can lead to blockages or pump failure. • Turn off the pump and disconnect any electrical components before performing maintenance or cleaning to avoid the risk of electric shock or injury. • Do not allow children or pets to climb or play near the water feature to prevent accidents such as falling or drowning, especially for larger models that hold more water. • The product should be used strictly as a decorative water feature. Do not use it for bathing or any other unintended purpose, as this could damage the product or lead to injury. • In case of freezing weather, drain the water and store the product indoors if possible. Freezing water can expand and cause cracks or other damage to both polyresin and cement models. • The water feature may be heavy, especially if made of cement. Ensure it is moved and lifted properly by multiple people if necessary to avoid injury. Do not attempt to move the product when filled with water. • If the water feature contains lighting elements, ensure all bulbs are correctly rated for outdoor use and replace them only with parts rated for safe outdoor use to avoid electrical hazards. • Do not use harsh chemicals, abrasive cleaners, or pressure washers on polyresin or cement surfaces as this could lead to material degradation or discolouration •Check the water pump regularly to ensure it is functioning correctly, and clean it as instructed to prevent blockages or malfunctions, which could lead to overheating or electrical issues. GPSR Information UK Manufacturer: Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. Person Responsible: Rana Harvey, Monster Group UK Limited, Monster House 19-23 Alan Farnaby Way, Industrial Estate Sheriff Hutton, York YO60 6PG, England. +441347878880 EU Manufacturer: Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL Netherlands. Person Responsible: Rana Harvey, Monster Group BV, Van Heemskerckweg 28A & B, Venlo 5928LL, Netherlands. +441347878880 1. Step 1 1\. Remove plastic bag from packaging. Read this instruction sheet before proceeding. 2. Step 2 2\. Place base on a flat surface, and insert reservoir onto base. 3. Step 3 3\. Read pump user manual. Insert the water pump into water tube. 4. Step 4 4\. Insert fountain top on reservoir and put pump into water. Water should be higher than the pump. 5. Step 5 5\. Make sure the water tube is properly connected with the pump, and is not crimpled. 6. Step 6 6\. The concave edge of the fountain top should adhere to the convex part of the reservoir. Be sure that the electric wire is passed through the wire opening. 7. Step 7 7\. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly. 8. Step 8 8\. Please do not use the electrical plug in wet weather conditions. 9. Step 9 9\. Please do not use in adverse weather conditions. 10. Please Note Please note: On first use, there may be air in the pump. It may take several minutes until all the air escapes. monstershop (opens in new tab)Terms (opens in new tab)Privacy (opens in new tab)

Instructions by

monstershop

Water Feature - Radiant Falls

This guide provides step-by-step instructions for assembling, operating, and maintaining your Monster Shop Water Feature.

Product Information

Water Feature - Radiant Falls

Water Features bring a serene, cascading water display to your garden or patio. Its design creates a calming flow of water perfect for enhancing the tranquil atmosphere of any outdoor space, ideal for adding a touch of elegance and relaxation to your surroundings.

Dimensions: 31 (L) x 31 (W) x 71.5 (H) cm
Weight: 6.75kg
Power: 6.7W
SKU: 216380

Plug Included: UK & EU

IP Rating: IP44

Cable Length: 7m

Input: 230-240V-50Hz

Output: AC 12V

• Ensure the product is installed on a flat, stable surface to prevent tipping or imbalance, especially when filled with water. Uneven ground can lead to instability and potential accidents.

• Follow the assembly instructions carefully. Improper assembly can cause leaks, instability, or structural failure, which may lead to injury or damage.

• If the water feature is made from polyresin, avoid exposing it to direct sunlight for extended periods as UV light may cause material degradation or discolouration over time. For cement models, avoid harsh impacts, as cement can crack or chip.

• Always use the recommended type of water pump. Using an incompatible or incorrect pump could lead to electrical hazards, mechanical failure, or damage to the water feature.

• Place the water feature near a ground-fault circuit interrupter (GFCI) outlet for electrical safety, and regularly test the GFCI to ensure it is functioning properly.

• Ensure that all electrical cords are routed away from walkways and are properly secured to avoid tripping hazards. Do not allow electrical components to sit in water or become submerged unless specified as waterproof.

• Avoid overfilling the water feature to prevent splashing or water damage to surrounding areas. Follow the recommended water level in the product manual to avoid pump damage or malfunction.

• Regularly inspect the water feature for any cracks, chips, or damage. Repair or replace any damaged components immediately to avoid further damage or injury.

• Keep the water clean by following regular maintenance and water treatment guidelines. Dirty water can lead to blockages or pump failure.

• Turn off the pump and disconnect any electrical components before performing maintenance or cleaning to avoid the risk of electric shock or injury.

• Do not allow children or pets to climb or play near the water feature to prevent accidents such as falling or drowning, especially for larger models that hold more water.
• The product should be used strictly as a decorative water feature. Do not use it for bathing or any other unintended purpose, as this could damage the product or lead to injury.

• In case of freezing weather, drain the water and store the product indoors if possible. Freezing water can expand and cause cracks or other damage to both polyresin and cement models.

• The water feature may be heavy, especially if made of cement. Ensure it is moved and lifted properly by multiple people if necessary to avoid injury. Do not attempt to move the product when filled with water.

• If the water feature contains lighting elements, ensure all bulbs are correctly rated for outdoor use and replace them only with parts rated for safe outdoor use to avoid electrical hazards.

• Do not use harsh chemicals, abrasive cleaners, or pressure washers on polyresin or cement surfaces as this could lead to material degradation or discolouration

•Check the water pump regularly to ensure it is functioning correctly, and clean it as instructed to prevent blockages or malfunctions, which could lead to overheating or electrical issues.

1. Step 1

1\. Remove plastic bag from packaging. Read this instruction sheet before proceeding.

2. Step 2

2\. Place base on a flat surface, and insert reservoir onto base.

3. Step 3

3\. Read pump user manual. Insert the water pump into water tube.

4. Step 4

4\. Insert fountain top on reservoir and put pump into water. Water should be higher than the pump.

5. Step 5

5\. Make sure the water tube is properly connected with the pump, and is not crimpled.

6. Step 6

6\. The concave edge of the fountain top should adhere to the convex part of the reservoir. Be sure that the electric wire is passed through the wire opening.

7. Step 7

7\. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.

8. Step 8

8\. Please do not use the electrical plug in wet weather conditions.

9. Step 9

9\. Please do not use in adverse weather conditions.

10. Please Note

Please note: On first use, there may be air in the pump. It may take several minutes until all the air escapes.