\n

Ensure that each beam is properly hammered into place before continuing with the assembly process.

\n

Be sure that each MDF board is slotted into the shelf correctly before you begin storage on the racking.

\n

Ensure the moulded feet are attached correctly to prevent any potential injury.

\n

Treat the MDF boards with varnish or mould prevention products if using in a humid environment.

\n\n","hidden":"","updatedAt":1743888084399}2e:T58a,{"lang":"en","value":"

Please read through the guide below if you have any issues or faults with your Z-Rax Heavy Duty Racking System.

\n

There are parts missing from my order.

\n

If a part is missing please get in touch with us within 7 days on receipt of your order. You can call or email our friendly and helpful Customer Support Team. Please see details on the Contact Us page.

\n

The MDF has begun to warp or change shape.

\n

Do not use this Z-Rax Heavy Duty Racking System for storage in a humid environment as the included MDF is untreated and is therefore susceptible to bend in an extremely damp or warm room. Other MDF can be cut and used by the customer.

\n

If you would like to reduce the potential of warping, please feel free to personally treat the MDF with a varnish or paint.

\n

What kind of tools should I use to assemble the Z-Rax Heavy Duty Racking System?

\n

The only tools required to assemble a Z-Rax Heavy Duty Racking System bay is a rubber mallet - available to buy at Monster Shop.

\n

I’m worried the MDF shelves might grow mould in my garage.

\n

We recommend you treat the MDF with mould prevention products. They are very accessible and cheap from good DIY stores.

\n","updatedAt":1744106198213,"hidden":null}